John Deere 325G
The John Deere 325G is a compact track loader designed for versatility and performance across various job sites. It features a vertical-lift boom that provides excellent height and reach at the top of the lift path, combined with outstanding stability. The machine has a rated operating capacity of nearly 2,600 pounds, allowing it to handle heavy materials and precisely place pallets.
With a height to hinge pin of 10 feet 6 inches, the 325G can easily load tandem-axle dump trucks, fill hoppers, and feed mixers. Its powerful engine delivers impressive pushing power and bucket breakout forces, making it suitable for carving out clay, plowing through piles, and handling large loads.
The 325G comes equipped with a standard two-speed transmission, enabling travel speeds of just over eight miles per hour for rapid work cycles and quick trips around the jobsite. It features electrohydraulic ISO-pattern joystick controls as standard, with options for ISO-H switchable controls and an EH joystick performance package with creep control and boom- and bucket-speed settings.
The machine’s design incorporates a low center of gravity, 34-degree bucket rollback, and optional features like ride control and hydraulic self-leveling to enhance productivity. The undercarriage includes rubber tracks with steel inserts, triple-flange smooth-ride all-steel rollers, and double-flange smooth-ride all-steel idlers.
The 325G offers a spacious cab with a large entryway and swing-out door for operator comfort. It also provides options for enhanced visibility, including LED side lighting and a rearview camera. The hydraulic system delivers standard flow of 78 L/m (21 gpm), with a high-flow option of 120 L/m (32 gpm) available for powering attachments.
Overall, the John Deere 325G compact track loader is engineered to deliver high performance, versatility, and operator comfort across a wide range of applications in construction, landscaping, and material handling.
John Deere 325G Specs
The John Deere 325G is a compact track loader with the following key specifications:
– Gross power: 74 hp (54.8 kW)
– Net power: 70 hp (52.5 kW)
– Operating weight: 9,500 lbs (4,313 kg)
– Rated operating capacity: 2,590 lbs (1,176 kg)
– Height to hinge pin: 126.1 inches (10 ft 6 in)
– Engine: Yanmar 3.3L turbocharged diesel, Tier 4 emissions rating
– Fuel tank capacity: 20.9 gallons
– Maximum speed: 5.8 mph (9.3 km/h)
– Hydraulic pump flow: 18.5 gal/min (70 L/min) standard, 26.7 gal/min (101 L/min) optional
– Ground pressure: 5.7 psi (39.3 kPa)
– Bucket breakout force: 6,000 lbs (2,724 kg)
The current price for a new 2024 John Deere 325G is approximately $88,881.
This compact track loader offers enhanced visibility, serviceability, and a comfortable cab designed for operator productivity. It can be equipped with various attachments to suit different job requirements.
John Deere 325G Applications
The John Deere 325G compact track loader is a versatile machine suitable for a wide range of applications across various industries. Here are some of the key areas where the 325G excels:
Construction
In construction, the 325G is ideal for site preparation, grading, and excavation tasks. Its powerful engine and high breakout force allow it to handle tough digging jobs, while its compact size enables it to maneuver in tight spaces on construction sites. The loader can also be used for material handling, moving pallets of bricks or other building materials with ease.
Landscaping
Landscapers find the 325G particularly useful for tasks such as grading, trenching, and soil preparation. Its low ground pressure makes it suitable for working on delicate surfaces without causing excessive damage. The machine’s ability to use various attachments allows for tasks like tree spade operations, mulch spreading, and hardscape installation.
Agriculture
On farms, the 325G proves valuable for tasks such as moving feed, cleaning barns, and handling silage. Its high lift capacity and reach make it efficient for loading trucks or feed mixers. The track system provides excellent traction in muddy or soft ground conditions often encountered in agricultural settings.
Snow Removal
The 325G’s power and maneuverability make it an excellent choice for snow removal operations. Equipped with a snow blade or snow blower attachment, it can efficiently clear parking lots, driveways, and other areas. The track system provides superior traction in snowy and icy conditions.
Forestry
In forestry applications, the 325G can be used for clearing brush, moving logs, and general land management tasks. Its compact size allows it to work effectively in wooded areas where larger machines might struggle to maneuver.
Road Maintenance
The loader is useful for various road maintenance tasks, including shoulder work, ditch cleaning, and asphalt repair. Its ability to use different attachments makes it versatile for tasks like sweeping, milling, and material spreading.
Demolition
In demolition projects, the 325G can be equipped with hydraulic hammers or grapples to break up concrete or handle debris. Its compact size allows it to work in confined spaces often encountered in interior demolition work.
Utility Installation
The 325G is well-suited for utility installation projects, such as laying pipes or cables. It can be used for trenching, backfilling, and moving materials around the job site.
Material Handling
In warehouses, recycling centers, and other industrial settings, the 325G excels at material handling tasks. Its high lift capacity and precise controls make it ideal for stacking, loading, and unloading materials.
Mining and Quarrying
While not designed for large-scale mining operations, the 325G can be useful in smaller quarries or for auxiliary tasks in larger mining operations, such as cleanup work or material handling in confined spaces.
The John Deere 325G’s versatility, power, and compact design make it a valuable asset across these diverse applications, offering productivity and efficiency in a wide range of work environments.
John Deere 325g Price
The price of a John Deere 325G compact track loader varies depending on its condition, hours of use, and included attachments. Here’s an overview of approximate price ranges for new and used 325G models in the USA:
New John Deere 325G
A new John Deere 325G compact track loader typically ranges from $65,000 to $75,000. This price can increase with additional options and attachments. Factors that influence the price of a new 325G include:
– Chosen configuration and options
– Included attachments
– Dealer location and pricing
– Current market conditions and availability
Used John Deere 325G
Used 325G prices vary widely based on the machine’s age, condition, and hours of operation. Here’s a general breakdown:
Late model (1-3 years old):
– Low hours (under 1,000): $50,000 – $60,000
– Medium hours (1,000-2,500): $45,000 – $55,000
– High hours (over 2,500): $40,000 – $50,000
Older models (4+ years old):
– Low hours: $35,000 – $45,000
– Medium hours: $30,000 – $40,000
– High hours: $25,000 – $35,000
These prices are approximate and can fluctuate based on:
– Overall condition of the machine
– Maintenance history
– Included attachments
– Local market demand
– Seller type (dealer vs. private party)
When considering a used 325G, it’s important to inspect the machine thoroughly, review its maintenance records, and consider factors like warranty coverage and potential repair costs.
Financing and Leasing Options
John Deere offers various financing and leasing options for both new and used equipment, which can affect the overall cost of acquiring a 325G. These options include:
– Low-rate financing
– Lease-to-own programs
– Seasonal payment plans
– Skip payment options for certain industries
The availability and terms of these programs may vary based on the buyer’s credit history, the dealer’s offerings, and current promotions.
When shopping for a John Deere 325G, it’s advisable to compare prices from multiple dealers, consider both new and used options, and factor in long-term costs such as maintenance and fuel efficiency to determine the best value for your specific needs.
John Deere 325g – Where to Buy
To purchase a John Deere 325G compact track loader in the USA, there are several options available:
1. John Deere Dealers: Authorized John Deere dealerships are the primary source for new 325G models. These dealers often have a variety of new and used machines in stock, along with financing options. You can find local dealers through the John Deere website by entering your zip code.
2. Online Equipment Marketplaces: Websites like MachineryTrader, EquipmentTrader, and Ritchie Bros. Auctioneers feature listings for both new and used John Deere 325G loaders. These platforms allow you to compare prices and conditions from various sellers across the country.
3. Local Equipment Rental Companies: Some rental companies sell their older inventory to make room for newer models. This can be a good option for finding used John Deere 325G loaders at competitive prices.
4. Construction Equipment Auctions: Auctions can be a great way to find used equipment at potentially lower prices. Look for local or online auctions that specialize in construction equipment.
5. Specialty Equipment Dealers: Some dealers focus specifically on compact construction equipment and may have a selection of John Deere 325G loaders available for sale.
6. Classified Ads: Websites like Craigslist or Facebook Marketplace often have listings for used equipment from private sellers, which may include the John Deere 325G.
When purchasing, it is advisable to inspect the machine thoroughly, review its maintenance history, and consider warranty options if buying new or certified used equipment.
John Deere 325g – John Deere Dealers
To purchase a John Deere 325G compact track loader, you can find authorized John Deere dealers through the following methods:
1. John Deere Dealer Locator: Use the official John Deere website to find dealers in your area by entering your zip code or city and state. This tool will show you the nearest authorized dealers.
2. Local Equipment Dealerships: Many local heavy equipment dealerships carry John Deere products, including the 325G compact track loader. Check with equipment dealers in your region.
3. John Deere Construction & Forestry Divisions: These specialized divisions often have dedicated sales representatives who can assist with purchasing compact construction equipment like the 325G.
4. Agricultural Equipment Dealers: Some John Deere agricultural equipment dealers also carry compact construction equipment and may have the 325G available.
5. Regional John Deere Distributors: Larger regional distributors often have a wide selection of John Deere equipment, including compact track loaders.
6. Construction Equipment Shows and Expos: These events often feature John Deere equipment and can connect you with dealers or sales representatives.
7. Online Dealer Networks: Some authorized John Deere dealers have online portals where you can browse inventory and contact sales teams.
8. John Deere Customer Service: Contacting John Deere’s customer service directly can help you locate a dealer or sales representative in your area who can assist with purchasing a 325G.
When contacting a dealer, be prepared to discuss your specific needs, desired features, and any questions you have about the 325G compact track loader. Many dealers offer options for financing, warranties, and service plans, so inquire about these as well.
Remember that availability may vary by location, and some dealers might need to order the 325G if it’s not in their current inventory. It’s also worth asking about both new and used options, as some dealers may have pre-owned 325G models available.
John Deere 325g – Dealer Fees
When purchasing a John Deere 325G compact track loader from a dealer, there are several fees that may be added to the base price of the machine. These dealer fees can vary depending on the specific dealer and location, but typically include:
1. Delivery Fee: This covers the cost of transporting the machine from the dealer to the customer’s location. The fee can range from a few hundred to over a thousand dollars, depending on the distance.
2. Documentation Fee: Also known as a doc fee, this covers the administrative costs associated with processing the sale. It usually ranges from $100 to $500.
3. Preparation Fee: This fee covers the dealer’s costs for inspecting, cleaning, and preparing the machine for delivery. It can range from $200 to $800.
4. PDI (Pre-Delivery Inspection) Fee: Similar to the preparation fee, this covers the cost of thoroughly inspecting the machine before delivery. It may be included in the preparation fee or charged separately.
5. Extended Warranty Fee: If the customer opts for an extended warranty beyond the standard manufacturer’s warranty, this will be an additional cost.
6. Taxes: Sales tax will be applied to the purchase, which varies by state and locality.
7. Registration Fee: If the machine needs to be registered, there may be a fee for handling this process.
8. Financing Fees: If the customer chooses to finance the purchase, there may be additional fees associated with setting up the loan.
9. Accessories and Attachments: Any additional equipment or attachments added to the base model will increase the overall cost.
10. Training Fee: Some dealers may charge for operator training, especially for new equipment with advanced features.
It’s important to note that these fees can significantly impact the final price of the John Deere 325G. Customers should always ask for a detailed breakdown of all fees and negotiate when possible. Some fees may be mandatory, while others could be reduced or waived depending on the dealer’s policies and the customer’s negotiation skills.
John Deere 325g Rental Options
The John Deere 325G compact track loader is available for rent through various equipment rental companies and John Deere dealerships across the USA. Here are some key points about renting a John Deere 325G:
Rental Providers
1. National Equipment Rental Chains: Companies like United Rentals, Sunbelt Rentals, and Herc Rentals often have John Deere 325G models available in their fleet.
2. Local Equipment Rental Companies: Many local and regional rental businesses offer John Deere compact track loaders, including the 325G.
3. John Deere Dealerships: Some authorized John Deere dealers have rental programs that include the 325G model.
Rental Terms
1. Duration: Rental periods typically range from daily to weekly to monthly options. Long-term rentals may be available for extended projects.
2. Pricing: Rates vary depending on the rental duration, location, and current demand. Daily rates might range from $300 to $500, while weekly rates could be between $1,000 to $1,500.
3. Insurance: Most rental agreements require the renter to provide insurance coverage or purchase additional rental protection.
Considerations When Renting
1. Attachments: Check if the rental includes necessary attachments or if they’re available for an additional fee.
2. Delivery: Some rental companies offer delivery and pickup services, often for an extra charge.
3. Operator Training: Inquire about any available operator training or familiarization sessions, especially if you’re new to using this equipment.
4. Maintenance: Clarify who is responsible for routine maintenance during the rental period.
5. Fuel: Most rentals require the machine to be returned with a full fuel tank.
Advantages of Renting
1. Cost-effective for short-term projects
2. No long-term storage or maintenance responsibilities
3. Access to the latest models and technology
4. Flexibility to choose the right machine for each job
When considering renting a John Deere 325G, it’s advisable to compare rates and terms from multiple providers, ensure the machine meets your project requirements, and carefully review the rental agreement before signing.
John Deere 325G Weight
The John Deere 325G Compact Track Loader has an operating weight of 9,500 lbs (4,313 kg). This weight is consistent across multiple sources and is considered the standard operating weight for this model.
It’s worth noting that the weight can vary slightly depending on the configuration:
1. With the standard 320-mm (12.6 in.) track, the operating weight is 4,313 kg (9,500 lb)
2. With the optional 400-mm (15.8 in.) track, the operating weight increases to 4,381 kg (9,650 lb)
This operating weight places the John Deere 325G in the mid-range for compact track loaders, making it suitable for a variety of construction and landscaping tasks while still maintaining relatively good maneuverability for its class.
John Deere 325G Skid Steer
The John Deere 325G is a compact track loader that offers versatility and power for various construction and landscaping tasks. Here are the key details about this machine:
Specifications:
– Operating weight: 9,500 lbs (4,313 kg)
– Peak horsepower: 74 hp
– Engine: Does not require DEF (Diesel Exhaust Fluid) due to being under 75 hp threshold
Features:
– Enhanced visibility and serviceability
– Comfortable cab designed for operator productivity
– Yanmar 3.3L turbocharged diesel engine
– Various attachments available for different job requirements
The 325G is part of John Deere’s small frame machine category, positioned as the second largest in the compact track loader lineup after the 331G and 333G (large frame machines)
Pricing:
Prices for the John Deere 325G vary based on the model year and condition:
– New 2023 models: Around $74,900
– Used models:
– 2021 with 280 hours: $49,900
– 2019 with 795 hours: $38,600
Rental options are also available, with prices ranging from $1,985 to $3,675 per rental period, depending on the machine’s age and usage hours
The 325G is known for its versatility, making it suitable for a wide range of applications in construction and landscaping. Its compact size combined with powerful performance makes it a popular choice among contractors and equipment operators.
John Deere 325G Problems
Based on the search results, there are a few reported problems with the John Deere 325G compact track loader:
1. EGR Issues: Some users have reported problems with the Exhaust Gas Recirculation (EGR) system. One user mentioned fixing a broken EGR on their John Deere machine, although it was not specifically for the 325G model.
2. Mobility Problems: There’s a report of a 325G track skid steer that suddenly stopped moving. This issue occurred on a machine purchased new in July 2019, suggesting potential drivetrain or hydraulic system problems.
3. Fuel System Issues: A user reported a fueling problem where the machine was sucking air from the pickup tube in the tank. This caused performance issues, but the machine ran properly when fuel was supplied directly through the fill port.
It’s important to note that while these problems have been reported, they may not be widespread or representative of all John Deere 325G models. Regular maintenance and proper operation can help prevent many issues.
Additionally, the 325G has some advantages, such as not requiring Diesel Exhaust Fluid (DEF) due to its 74 horsepower engine being below the 75 horsepower threshold for DEF requirements.
If you’re experiencing problems with a John Deere 325G, it’s recommended to consult with an authorized John Deere dealer or a qualified technician for proper diagnosis and repair.
John Deere 325G Lifting Capacity
The John Deere 325G Compact Track Loader has the following lifting capacities:
1. Rated Operating Capacity: 1,176 kg (2,590 lb)
2. Tipping Load: 3,360 kg (7,400 lb)
3. Lift Force: 23.3 kN (5,250 lbf)
4. Bucket Breakout Force: 38.9 kN (8,750 lbf)
The 325G features a vertical-lift boom design, which combines height and reach at the top of the lift path with outstanding stability. This design allows the machine to precisely place pallets and handle heavy materials efficiently
Key lifting specifications:
– Height to hinge pin: 3,200 mm (126.1 in / 10 ft 6 in)
– Dump height (maximum): 2,590 mm (102.1 in)
These lifting capabilities make the John Deere 325G suitable for various tasks such as loading high-sidewall dump trucks, feeding mixers, and filling hoppers. The machine’s design and power allow it to handle large loads and carve through tough materials like clay.
John Deere 325G Reviews
Summary of the John Deere 325G Compact Track Loader Reviews:
1. Performance and Power:
The 325G is praised for its lifting and pushing power. It offers a rated operating capacity of 1,176 kg (2,590 lb) and a tipping load of 3,360 kg (7,400 lb). Users appreciate its ability to handle heavy materials and carve through tough materials like clay.
2. Visibility:
The 325G is reported to have 65% better rear visibility compared to some competitors. This is due to the design of the rear hood, with the fan located on the back of the engine rather than on top.
3. Serviceability:
Owners find the 325G easy to service and maintain. It features easy-to-remove perforated side panels that provide wide-open access to components like the alternator, starter, and coolers.
4. Durability:
The hydraulic hoses on the 325G are covered with a protective sleeve and, in the undercarriage, they are protected by a steel plate, which can help prevent damage.
5. Comfort:
The cab is designed for operator productivity and comfort. Some models come with a severe-duty door option, which users find important, especially when using attachments like forestry mulchers.
6. Hydraulics:
The high-flow hydraulics option is available but may not be necessary for all users. It provides versatility for a wide range of attachments, though only a few attachments actually require high flow.
7. Long-term Ownership:
After two years of ownership, one reviewer mentioned they would buy the machine again, indicating satisfaction with its performance and reliability.
8. Warranty:
John Deere offers a full machine standard warranty that covers defects in materials or workmanship for two years after delivery or 2,000 hours, which adds to the machine’s value proposition.
Overall, the John Deere 325G receives positive reviews for its power, visibility, serviceability, and versatility.
Users appreciate its performance across various applications in construction and landscaping. However, as with any equipment, potential buyers should consider their specific needs and test the machine before making a decision.
John Deere 325G Oil Capacity
Based on the search results provided, I can give you information about the oil capacity and oil specifications for the John Deere 325G Compact Track Loader:
1. Engine Oil:
The John Deere 325G uses John Deere Plus-50 II 10W-30 engine oil. While the exact oil capacity is not explicitly stated, compact track loaders of this size typically have an engine oil capacity of around 8-10 quarts (7.6-9.5 liters).
2. Hydraulic Oil:
The hydraulic system uses John Deere Hy-Gard transmission and hydraulic oil. Again, the exact capacity is not always specified, but similar-sized compact track loaders usually have a hydraulic system capacity of approximately 12-15 gallons (45-57 liters).
3. Planetary Gear Case Oil:
The search results mention that the hydrostatic planetary gear case oil should be drained and refilled, specifically for the 325G model[3]. However, the capacity for this is not specified.
4. Oil Change Intervals:
While not directly related to capacity, it’s worth noting that there are specified oil change intervals for the 325G. The hydrostatic planetary gear case oil change is recommended every 50 hours of operation[3].
It’s important to note that for precise oil capacities and specifications, it’s best to consult the official John Deere operator’s manual for the 325G model, as these can vary slightly between production years and specific configurations.
Always follow the manufacturer’s recommendations for oil types and capacities to ensure optimal performance and longevity of the machine.
John Deere 325G Horsepower
Based on the search results, the John Deere 325G Compact Track Loader has the following horsepower specifications:
1. Gross Horsepower: 54.8 kW (74 hp)
2. Net Horsepower: 52.5 kW (70 hp)
The engine powering the 325G is a Yanmar 4TNV98CT model with the following details:
– Engine Output – Gross: 54.8 kW (74 hp)
– Engine Output – Net: 52.5 kW (70 hp)
– Rated Speed: 2500 rpm
It’s important to note the distinction between gross and net horsepower. The gross horsepower is the engine’s output without considering power losses from accessories, while the net horsepower represents the actual power available for the machine’s operations after accounting for these losses.
The 325G uses a Tier 4 compliant engine, which meets EPA Final Tier 4/EU Stage IV emissions standards.
John Deere 325G Tracks
The John Deere 325G compact track loader has several track options available, with varying widths, tread patterns, and prices. Here’s a summary of the track options:
1. Track Widths:
– Standard width: 320 mm (12.6 inches)
– Optional wider track: 400 mm (16 inches)
2. Tread Patterns:
– C-Lug
– Z-Lug (ZigZag)
– Block
– Multi-Bar
– Turf Tread
3. Pricing:
Prices for John Deere 325G tracks vary depending on the style and vendor:
– Single tracks range from $1,045 to $1,225.
– Pairs of tracks are priced around $1,869 to $2,268.
4. Specifications:
– Pitch: 86 mm
– Number of links: 52
5. Brands:
Several brands offer compatible tracks for the John Deere 325G, including:
– DuroForce
– Bridgestone
– Arisun
6. Features:
– Some tracks are designed for specific terrains or applications, such as the turf tread for sensitive surfaces
– Tracks are typically made of durable rubber compounds to withstand various working conditions
When selecting tracks for a John Deere 325G, consider the specific application, terrain, and budget. Many vendors offer free shipping on these tracks. It’s important to choose tracks that match the machine’s specifications (320x86x52 or 400x86x52) to ensure proper fit and performance.
John Deere 325G Fuel Capacity
The fuel capacity of the John Deere 325G Compact Track Loader is:
21 gallons (79 liters)
This fuel capacity allows for extended operation times between refueling, which is beneficial for productivity on job sites. It’s worth noting that fuel consumption will vary depending on the specific tasks being performed and the operating conditions.
John Deere 325G Compact Track Loader
1. Engine and Power:
– Gross Power: 54.8 kW (74 hp)
– Net Power: 52.5 kW (70 hp)
– Engine: Yanmar 4TNV98CT, 3.3L displacement, turbocharged
– Rated Speed: 2500 rpm
2. Performance:
– Rated Operating Capacity: 1,176 kg (2,590 lb)
– Tipping Load: 3,360 kg (7,400 lb)
– Bucket Breakout Force: 38.9 kN (8,750 lbf)
– Lift Breakout Force: 23.3 kN (5,250 lbf)
3. Dimensions:
– Operating Weight: 4,313 kg (9,500 lb)
– Height to Hinge Pin: 3,200 mm (126.1 in / 10 ft 6 in)
– Length (with foundry bucket): 3,460 mm (136.3 in)
– Width (without bucket): 1,820 mm (71.5 in)
– Height (top of cab): 2,060 mm (81.1 in)
4. Hydraulics:
– Standard Flow: 70 L/min (19 gal/min)
– High-Flow Option: 101 L/min (27 gal/min)
– System Pressure: 237.87 bar (3,450 PSI)
5. Track System:
– Standard Track Width: 320 mm (12.6 in)
– Optional Track Width: 400 mm (16 in)
6. Other Features:
– Vertical lift geometry
– Two-speed transmission with max speed of 13.2 km/h (8.2 mph)
– Fuel Tank Capacity: 79 L (21 gal)
7. Price:
– New models (as of 2024) are priced around $88,881
– Used models vary in price depending on age and condition
The John Deere 325G is known for its versatility, power, and enhanced visibility. It’s suitable for various applications in construction and landscaping, offering a good balance of performance and compact size.
John Deere 325G Attachments
The John Deere 325G Compact Track Loader is compatible with a wide range of attachments, enhancing its versatility for various applications. Here’s an overview of attachments available for the 325G:
1. Buckets: Various bucket types are available, including dirt buckets, low-profile buckets, and root grapple buckets.
2. Angle-Tatch: This attachment allows for up to 14 degrees of tilt for non-hydraulic attachments, improving precision in grading and leveling tasks.
3. Vibratory Rollers: These are listed as compatible attachments for the 325G.
4. Rotary Cutters: Models such as the RC78B are compatible with the 325G.
5. Rotary Tillers: The RS72, RX72, and RX84 models are compatible, requiring high-flow hydraulics.
6. Pallet Forks: These are standard attachments for material handling tasks.
7. Augers: For drilling holes in various materials.
8. Snow Blowers and Snow Pushers: For winter maintenance tasks.
9. Trenchers: For digging narrow trenches quickly.
10. Hydraulic Hammers: For breaking up concrete or rock.
The John Deere 325G uses a Quick-Tatch coupler system, which allows for easy switching between attachments. Some attachments may require the high-flow hydraulic option for optimal performance.
When selecting attachments, it’s important to consider the machine’s rated operating capacity of 2,590 lbs and its hydraulic capabilities. The 325G offers both standard flow (19 gal/min) and high-flow (27 gal/min) options, which can affect the performance of certain attachments.
For the most up-to-date and comprehensive list of compatible attachments, it’s recommended to consult with a John Deere dealer or refer to the official John Deere attachment compatibility guide.
John Deere 325G High Flow
The John Deere 325G Compact Track Loader offers a high-flow hydraulic option, which enhances its capabilities for certain attachments and tasks. Here are the key details about the high-flow option for the 325G:
1. Hydraulic Flow Rate:
– Standard flow: 70 L/min (19 gal/min)
– High-flow option: 101 L/min (27 gal/min)
2. Hydraulic Horsepower:
– Standard: 25 kW
– High-flow: 40.1 kW
3. Applications:
The high-flow option is particularly useful for attachments that require more hydraulic power, such as:
– Rotary tillers
– Cold planers
– Trenchers
– Forestry attachments
4. Availability:
The high-flow hydraulics option is mentioned as a feature on some 2022 models[2], indicating it’s a popular choice for this machine.
5. Performance:
The increased hydraulic flow and power allow for more efficient operation of high-demand attachments, potentially improving productivity on job sites.
6. Pricing:
While specific pricing for the high-flow option isn’t provided, it’s typically an add-on that increases the base price of the machine.
7. Compatibility:
When ordering or using a John Deere 325G with high-flow hydraulics, it’s important to ensure that attachments are compatible with the increased flow rate.
The high-flow hydraulic option significantly expands the versatility of the John Deere 325G, making it suitable for a wider range of applications and more demanding tasks. This feature is particularly valuable for contractors who need to use high-power attachments regularly.
John Deere 325G Hydraulic System and Filter
1. Hydraulic System:
– Standard Flow: 70 L/min (19 gal/min)
– High-Flow Option: 101 L/min (27 gal/min)
– Hydraulic Horsepower:
– Standard: 25 kW
– High-Flow: 40.1 kW
2. Hydraulic Oil:
– Capacity: 26.5 L (7.0 gal)
– Recommended Oil: John Deere Hydrau™ Hydraulic and Hydrostatic Oil
– Oil Change Interval: 1000 hours
3. Hydraulic Filter:
– Part Number: AT435649
– Replacement Interval: 500 hours
4. Hydraulic Oil Reservoir Breather:
– Part Number: AT101565
– Replacement Interval: 1000 hours
5. Maintenance:
– Regular hydraulic oil sampling is recommended every 500 hours
– The hydraulic oil filter should be replaced every 500 hours of operation
6. Filter Options:
While the official John Deere filter (AT435649) is recommended, there are aftermarket options available:
– Prices for hydraulic filters range from about $35 to $110, depending on the brand and seller
– Some maintenance kits include the hydraulic filter along with other filters for the 325G
It’s important to note that using the correct filter and following the recommended maintenance schedule is crucial for the proper functioning and longevity of the hydraulic system.
Always consult the operator’s manual for the most accurate and up-to-date information specific to your machine’s serial number.
John Deere 325G Service Manual
1. Technical Service Manual (TM14295X19):
– Available from multiple sources
– Prices range from $25.90 to $79.10
– This manual likely covers detailed repair and maintenance procedures
2. Operation and Test Service Manual (TM14293X19):
– Available from Walmart and eBay
– Prices range from $120.00 to $133.00
– This manual focuses on operation procedures and testing
3. Operation, Test, and Service Manual (TM14062X19):
– Available from Walmart
– Priced at $203.00
– Combines operation, testing, and service information
4. Repair Service Manual for specific serial numbers:
– Available for machines after serial number G328658 ($52.00)
– Available for machines after serial number J328658 ($51.00)
These manuals cover various aspects of the John Deere 325G Compact Track Loader, including:
– Safety information
– Operating instructions
– Maintenance procedures
– Repair guidelines
– Technical specifications
When choosing a manual, consider:
– The specific information you need (operation, repair, or both)
– Your machine’s serial number for compatibility
– Price and seller reputation
Most options offer free shipping. It’s recommended to verify the manual’s contents and compatibility with your specific 325G model before purchasing.
John Deere 325G Parts Manual
1. JOHN DEERE 325G SKID STEER PARTS CATALOG MANUAL #1:
– Price: US$104.00
– This appears to be the first part of a comprehensive parts catalog for the 325G model.
2. JOHN DEERE 325G SKID STEER PARTS CATALOG MANUAL #3:
– Price: US$97.00
– This is likely the third part of the parts catalog series for the 325G.
These parts catalog manuals typically include:
– Detailed diagrams of all components
– Part numbers for easy ordering
– Assembly and disassembly information
– Specifications for various parts
It’s worth noting that the parts catalog is different from a service or repair manual. While service manuals focus on maintenance and repair procedures, parts catalogs are specifically designed to help identify and order replacement parts for the machine.
For those looking for repair information in addition to parts details, there are also repair service manuals available:
3. John Deere 325G Compact Track Loader Repair Service Manual (S.N after G328658):
– Price: $52.00
– Free shipping
– Specific to machines with serial numbers after G328658
4. John Deere 325G Compact Track Loader Repair Service Manual (S.N after J328658):
– Price: $51.00
– Free shipping
– Specific to machines with serial numbers after J328658
When selecting a manual, make sure to choose the one that matches your specific machine’s serial number and your needs (parts identification or repair procedures).
John Deere 325G Parts Diagram
1. Jacks Small Engines Parts Lookup:
– Offers an exploded view parts lookup for the John Deere 325G
– Provides complete exploded views of all major components
– This is a free and easy-to-use online tool for identifying parts
2. Parts Catalog Manuals:
– JOHN DEERE 325G SKID STEER PARTS CATALOG MANUAL #1 (Price: US$104.00)
– JOHN DEERE 325G SKID STEER PARTS CATALOG MANUAL #3 (Price: US$97.00)
These parts catalog manuals typically include:
– Detailed diagrams of all components
– Part numbers for easy ordering
– Assembly and disassembly information
– Specifications for various parts
Parts catalog manuals usually contain comprehensive diagrams for each system and component of the machine. These diagrams are essential for:
– Identifying specific parts
– Understanding the assembly of components
– Locating parts within the machine’s structure
– Determining the correct part numbers for ordering replacements
For the most accurate and up-to-date parts diagrams, it’s recommended to use either the online parts lookup tool from Jacks Small Engines or purchase the official John Deere parts catalog manuals.