John Deere 2025r
The John Deere 2025R is a compact utility tractor that bridges the gap between the 1-series and larger 2-series models. It features a 24.2 hp Yanmar diesel engine with 18 hp at the PTO, providing ample power for various tasks. The tractor uses a hydrostatic transmission with two ranges, controlled by TwinTouch pedals for easy operation.
Key features of the 2025R include standard LED headlights and fender lights, an open operator station with a comfortable seat and tilt steering wheel, and cruise control. The tractor has a wheelbase of 63 inches and weighs approximately 1,793 lbs for the open station model.
The 2025R offers versatility with its implement options. It’s compatible with a front loader, mid-mount mower deck, and rear attachments. The AutoConnect mid-mower deck can be installed or removed in under 5 minutes without tools. The front Quick-Tatch hitch allows for easy attachment of implements like blades, brooms, and snow blowers.
Hydraulically, the 2025R provides 3.5 gpm for both steering and implement systems. It has a Category 1 three-point hitch with a lift capacity of 882 lbs at 24 inches behind the link arms. The PTO offers both rear (540 rpm) and mid (2100 rpm) options.
Compared to the 1025R, the 2025R has larger tires for better ground clearance and ride quality, a longer wheelbase, and slightly higher hydraulic capacity. However, it has a larger turning radius of 8.7 feet versus 7.4 feet for the 1025R.
The 2025R aims to provide a balance of power, versatility, and comfort for homeowners and small property managers. It offers many of the features found on larger tractors in a more compact package, making it suitable for those upgrading from a 1-series model or looking for a capable yet manageable tractor.
John Deere 2025r Specs,
The John Deere 2025R is a compact utility tractor designed for versatility and efficiency. It features a 24.2 hp Yanmar diesel engine that meets Final Tier 4 emissions standards, delivering 18 hp at the power take-off (PTO). The tractor is equipped with a hydrostatic transmission offering two ranges and is controlled by TwinTouch foot pedals for ease of operation.
Key specifications of the 2025R include:
Engine: 3-cylinder Yanmar 3TNV80F-NCJT diesel
Displacement: 77 cubic inches (1,268 cc)
Fuel tank capacity: 6 gallons (24 liters)
Hydraulic system: Open center with 3.5 gpm flow for both steering and implements
Three-point hitch: Limited Category 1 with a lift capacity of 882 lbs at 24 inches behind link arms
PTO: Rear 540 rpm and mid 2100 rpm
Wheelbase: 63 inches (160 cm)
Weight: Approximately 1,793 lbs (813.5 kg) for open station model
The 2025R comes standard with several features to enhance operator comfort and productivity:
LED headlights and fender lights
Cruise control
Tilt steering wheel
Color-coded controls for easy identification
Comfortable seat with armrests and full suspension
For versatility, the 2025R is compatible with various implements, including:
Front loader
AutoConnect mid-mount mower deck (54″ or 62″)
Rear attachments via the three-point hitch
Front attachments using the Quick-Tatch system
The tractor’s compact size and maneuverability make it suitable for a wide range of tasks on small farms, large properties, and landscaping operations. Its design improvements focus on enhancing visibility, comfort, and ease of use, making it an attractive option for both experienced operators and those new to tractor operation.
John Deere 2025r Parts
The John Deere 2025R compact utility tractor consists of various parts and systems that work together to provide its functionality and performance. Here’s a summary of the key components:
Engine:
The 2025R is powered by a Yanmar 3TNV80F-NCJT diesel engine. It’s a 3-cylinder, 1.268-liter (77 cubic inch) engine that produces 24.2 horsepower gross and 18 horsepower at the PTO. The engine features a water pump cooling system, pressurized lubrication, and meets Final Tier 4 emissions standards.
Transmission:
This tractor uses a hydrostatic transmission with two ranges. It’s controlled by TwinTouch foot pedals and includes standard cruise control. The final drive type is spur gear, and it has a differential lock.
Hydraulic System:
The 2025R has an open center hydraulic system with a maximum operating pressure of 2,150 psi (166.9 bar). The total flow rate is 5.6 gpm (21.2 lpm), with 3.4 gpm (12.9 lpm) for implements and 2.2 gpm (8.3 lpm) for steering. The system capacity is 2.6 gallons (9.8 L).
Three-Point Hitch:
It features a Category I three-point hitch with position control. The rear lift capacity is 1,433 lbs (650 kg) at the hitch ends and 882 lbs (400 kg) at 24 inches behind the link arms.
PTO:
The 2025R has both rear and mid PTOs. The rear PTO operates at 540 rpm, while the mid PTO runs at 2,100 rpm. Both use wet disc brakes and clutches.
Electrical System:
It includes a 40-amp alternator and a 500 CCA battery. The starter motor is rated at 2 hp (1 kW).
Operator Station:
The tractor has a two-post foldable ROPS (Roll-Over Protective Structure) that meets OSHA, SAE, and ASAE standards. It features a three-piece semi-flat platform and power steering.
Tires:
Various tire options are available for both front and rear, including R3 turf, R4 industrial, and R3 radial types.
Dimensions and Capacities:
The 2025R has a wheelbase of 63 inches (160 cm) and a shipping weight of 1,793 lbs (814 kg). It has a 6.1-gallon (23.1 L) fuel tank and a turning radius of 9 feet (3 m) without brakes.
These components work together to make the John Deere 2025R a versatile and efficient compact utility tractor suitable for a wide range of agricultural and property maintenance tasks.
John Deere 2025r Prices
The John Deere 2025R compact utility tractor has seen price increases over the years, reflecting its evolving features and market demand. Here’s a summary of price trends for the 2025R:
For models from 2013 to 2015, prices typically ranged from $15,900 to $16,500 USD.
Between 2016 and 2018, the price range increased slightly to $16,995 to $18,495 USD.
From 2019 to 2021, there was a more significant jump, with prices ranging from $21,017 to $23,495 USD.
The most recent models, from 2022 to 2024, have seen prices between $25,499 and $26,499 USD.
It’s worth noting that these prices are for the base tractor model. Adding implements and attachments can significantly increase the overall cost. For example:
A front-end loader typically adds around $4,000 to the price.
A 60-inch mid-mount mower deck can cost an additional $3,200.
A 54-inch snow blower attachment might add about $4,550.
A backhoe attachment could increase the price by approximately $7,150.
When fully equipped with various attachments, the total price for a 2025R package can reach around $35,750 or more.
The original manufacturer’s suggested retail price (MSRP) for the 2025R was $14,434 in 2013 and $15,348 in 2014. However, current pricing for new 2024 models can be significantly higher, with some dealers listing prices around $49,687 for a new 2024 John Deere 2025R.
These prices can vary based on location, dealer, included features, and current market conditions. It’s always recommended to get quotes from multiple dealers and consider both new and used options when shopping for a tractor.
John Deere 2025r Attachments
The John Deere 2025R compact utility tractor is designed to work with a variety of attachments, enhancing its versatility and functionality. Here’s a summary of the key attachments available for the 2025R:
Front Loader:
The 2025R is compatible with the John Deere 120R loader. This front-end loader has a lift capacity of 754 lbs at the pin and 520 lbs at 500mm forward. It’s designed for easy attachment and detachment, allowing for quick changes between tasks.
Mid-Mount Mower Decks:
Two AutoConnect mid-mount mower deck options are available:
1. 54-inch deck
2. 62-inch deck
These mower decks feature a hydraulic lift and can be installed or removed in under 5 minutes without tools.
Snowblower:
A front-mount snowblower attachment is available for clearing snow from driveways, sidewalks, and other areas. It’s particularly useful in regions with heavy snowfall.
Front Blade:
Front-mount blades are available in 54-inch and 60-inch widths. These are versatile attachments used for grading, leveling, and moving materials like dirt, gravel, or snow.
Backhoe:
The 260B Backhoe is compatible with the 2025R, though it’s worth noting that it’s not compatible with some cab configurations.
iMatch Quick-Hitch:
This system allows for easy attachment and detachment of rear implements that are iMatch compatible.
Other compatible attachments include:
– Front brooms
– Rear-mounted implements through the Category 1 three-point hitch
– Various ground-engaging tools like tillers, box blades, and landscape rakes
The 2025R also features a Front Quik-Tatch hitch system, which makes changing front implements quick and easy. All front implements (blades, brooms, and snow blowers) use a common hitch.
The tractor’s design allows for implement compounding, meaning operators can use multiple attachments simultaneously. For example, you can have the loader, mid-mower, and a rear hitch implement all attached at once, maximizing the tractor’s utility.
An optional premium independent mid lift system operates independently of the rear 3-point hitch, allowing operators to leave the mid-mower attached while using other implements.
These various attachments and features make the John Deere 2025R a highly versatile machine capable of handling a wide range of tasks in different seasons and conditions.
John Deere 2025r Weight
The John Deere 2025R compact utility tractor has different weight specifications depending on its configuration. Here’s a summary of the weight information for the 2025R:
The base shipping weight of the tractor is approximately 1,793 lbs (814 kg).
For models equipped with a Roll-Over Protective Structure (ROPS), the operating weight is around 1,872 lbs (849 kg).
When fitted with a cab, the operating weight increases to about 2,392 lbs (1,085 kg).
The maximum weight capacity for the front axle is 1,349 lbs (611 kg).
The maximum weight capacity for the rear axle is 2,425 lbs (1,099 kg).
It’s important to note that these weights can vary slightly depending on the specific configuration of the tractor, including any additional attachments or implements that may be installed. The weight distribution between the front and rear axles can also change based on the implements being used and the tasks being performed.
The relatively compact weight of the 2025R contributes to its versatility, allowing it to be maneuverable in tight spaces while still providing enough weight for stability during various operations. This balance of weight and size makes the 2025R suitable for a wide range of applications, from landscaping and light construction to small-scale farming and property maintenance.
John Deere 2025r Weight with Loader and Backhoe
The John Deere 2025R tractor’s weight varies depending on its configuration. Here’s a summary of the weight information, including estimates with loader and backhoe attachments:
Base weight:
– ROPS (Roll-Over Protective Structure) model: 1,872 lbs (849 kg)
– Cab model: 2,392 lbs (1,085 kg)
The John Deere 120R loader, which is compatible with the 2025R, weighs approximately 745 lbs (338 kg).
A typical backhoe attachment for this size tractor weighs around 900-1,000 lbs (408-454 kg).
Estimated total weight with attachments:
– 2025R with ROPS + loader + backhoe: approximately 3,517-3,617 lbs (1,595-1,641 kg)
– 2025R with cab + loader + backhoe: approximately 4,037-4,137 lbs (1,831-1,877 kg)
It’s important to note that these are approximate weights and may vary slightly based on specific models and configurations of the attachments. The tractor has a maximum weight capacity of:
– Front axle: 1,349 lbs (611 kg)
– Rear axle: 2,425 lbs (1,099 kg)
When operating with both loader and backhoe attached, the weight distribution will shift depending on the position of the attachments and any load being carried. Operators should always be mindful of the tractor’s weight limits and balance to ensure safe operation.
John Deere 2025r Lift Capacity
The John Deere 2025R compact utility tractor has the following lift capacity specifications:
Three-point hitch type: Limited Category 1
Lift capacity at 24 inches behind link arms:
– 882 lbs (400 kg) for earlier models
– 915 lbs (415 kg) for more recent models
Lift capacity at hitch points:
– Approximately 1,433 lbs (650 kg)
The tractor’s hydraulic system supports this lifting capability with:
– Total hydraulic flow rate: 7 gpm (26.5 L/min)
– Implement hydraulic flow: 3.5 gpm (13.25 L/min)
– Maximum operating pressure: 2,150 psi (148.2 bar)
The 2025R uses an open center hydraulic system with position control for the three-point hitch. This system allows for precise control of implements and attachments.
When equipped with a front loader, such as the John Deere 120R:
– Lift capacity at full height (at pivot pins): 754 lbs (342 kg)
– Lift capacity at 59 inches (1500 mm): 1,241 lbs (563 kg)
– Breakout force: 1,823 lbs (826 kg)
It’s important to note that the actual lifting performance may vary depending on the specific configuration of the tractor and the type of implement being used. The tractor’s design allows for versatile use with a range of attachments while maintaining stability and performance across various tasks.
John Deere 2025r Loader Lift Capacity
The John Deere 2025R compact utility tractor is commonly equipped with the John Deere 120R loader. Here’s a summary of the loader lift capacity specifications:
Lift capacity at full height (measured at pivot pins):
754 lbs (342 kg)
Lift capacity at 59 inches (1500 mm) from the ground:
1,241 lbs (563 kg)
Breakout force:
1,823 lbs (826 kg)
Maximum lift height (measured to pivot pins):
Approximately 94 inches (2,388 mm)
Dump clearance:
Around 72 inches (1,829 mm)
Dump reach:
About 15 inches (381 mm)
The 120R loader features a quick-attach design, allowing for easy installation and removal. It’s important to note that these capacities are for the loader itself, and the actual lifting performance may vary depending on factors such as the tractor’s configuration, tire selection, and any counterweights used.
The loader’s design complements the 2025R tractor’s compact size while providing substantial lifting power for various tasks such as material handling, landscaping, and light construction work. The loader’s capabilities make it a versatile attachment for the 2025R, enhancing the tractor’s overall utility in diverse applications.
John Deere 2025r Cab and Mauser Cab
The John Deere 2025R compact utility tractor offers two cab options: the factory-installed John Deere cab and the aftermarket Mauser cab. Here’s a summary of both options:
John Deere Factory Cab:
The factory-installed cab features full glass doors for maximum visibility with curved glass for a styled look. It’s sealed for cold weather operation but easily removable for summer use. The cab includes:
– Heater with fan
– Integrated switches and vents in the headliner
– Dome light
– Fully openable front and rear windows with gas struts
– Front sun visor
– Front work lights
– Front wiper with washer system
– Dual outside mirrors
The cab is ROPS (Rollover Protective Structure) certified and allows for improved rear visibility while reducing overall height. It has rubber isolation at all mounting points and interior sound insulation. The cab frame is immersion-primed and powder-coated for superior corrosion resistance.
Specifications:
– Cab height: 1495 mm (58.9 in.)
– Overall height when installed: 2040 mm (80.3 in.)
– Overall height to top of beacon: 2210 mm (87 in.)
– Cab weight: 236 kg (520 lb)
Mauser Cab:
The Mauser cab is an aftermarket option that can be installed on the 2025R. While specific details about the Mauser cab are not provided in the search results, it’s mentioned that there’s a relocation bracket available for use with the 2025R tractors equipped with Mauser cabs and mechanical self-leveling (MSL) loaders. This bracket prevents interference between the Mauser cab and the MSL loader mast.
Both cab options enhance operator comfort and extend the usability of the tractor in various weather conditions. The choice between the John Deere factory cab and the Mauser cab may depend on specific needs, preferences, and availability.
John Deere 2025r Problems
The John Deere 2025R compact utility tractor, while generally reliable, has experienced some issues reported by owners and users. Here’s a summary of common problems:
Brake linkage failure: A significant issue affecting 2025R models manufactured between November 1, 2017, and September 30, 2022. The front bell crank of the brake linkage could crack and fail, leading to a safety recall.
Front axle fluid loss: Many users report unexplained loss of front axle fluid, potentially due to heat expansion or heavy loader use. This issue requires frequent monitoring and refilling of the fluid.
Electrical problems: Some owners have experienced electrical issues, including burning smells, smoke, and the tractor continuing to run after the key is turned off.
PTO-related issues: There have been reports of PTO problems, though specific details are limited.
Hydrostatic transmission maintenance: While not necessarily a problem, the hydrostatic transmission requires regular maintenance to ensure optimal performance.
Fuel system issues: Some users have reported occasional problems with the fuel system, though these are not widespread.
Air cleaner bracket concerns: In older models, there were issues with the air cleaner bracket causing vibrations that could lead to valve cover damage.
Oil leaks: Some owners have noticed small oil leaks, which may require attention.
Cost of repairs: When issues do occur, the cost of repairs can be significant due to the specialized nature of the equipment and parts.
It’s important to note that many of these issues can be mitigated through regular maintenance and proper operation. Additionally, John Deere has addressed some of these problems through recalls and product improvements. Despite these reported issues, the 2025R remains a popular and generally reliable tractor for many users.
John Deere 2025r Package Deals
John Deere offers several package deals for the 2025R compact utility tractor. Here’s a summary of some common package options:
Groundbreaker XL Package:
Price: Approximately $35,896
Includes:
– John Deere 2025R tractor (25 HP, 4WD, diesel)
– John Deere 120R loader with 53″ quick-change bucket
– John Deere 260B backhoe with 12″ bucket and 6’2″ digging depth
– Ballast box
– 6-year/1,000-hour PowerGard comprehensive warranty
Basic Package:
Price: Around $23,550 cash or $356/month
Includes:
– John Deere 2025R tractor (23.9 HP, 4WD, hydrostatic transmission)
– John Deere 120R loader
– 6-year warranty
– Choice of implement (typically box blade, pallet fork, or bale spear)
Some dealers offer additional package options that may include:
– Mid-mount mower deck (54″ or 62″)
– Front blade
– Rotary cutter
– Utility trailer
Financing options are often available, such as:
– 0% APR for 60, 72, or 84 months
– Cash discounts (e.g., $1,000 off on certain model years)
– Additional discounts with the purchase of implements
Package prices and components can vary by dealer and region. Some dealers may offer seasonal promotions or bundle different attachments based on local needs. It’s recommended to check with local John Deere dealers for the most current package deals and pricing in your area.
John Deere 2025r Reviews
The John Deere 2025R compact utility tractor has received generally positive reviews from owners and users. Here’s a summary of common points mentioned in reviews:
Pros:
– Powerful and versatile for its size
– Comfortable operator station with good visibility
– Easy-to-use hydrostatic transmission
– Smooth operation and good maneuverability
– Capable of handling a wide range of tasks and attachments
– Improved stability compared to smaller models like the 1025R
– Good fuel efficiency
– High-quality build and durability
Cons:
– Some users find the low range too slow and high range too fast for certain tasks like mowing
– A few reports of minor rattles or vibrations
– Occasional electrical issues reported by some owners
– Some users wish for more power in certain applications
Many reviewers who upgraded from smaller models like the 1025R or 2210 found the 2025R to be a significant improvement in terms of stability, power, and versatility. The tractor is often praised for its ability to handle a variety of tasks, from mowing and bushhogging to grading and loader work.
Users appreciate the comfort of the operator station, the ease of attaching and detaching implements, and the overall build quality. The hydrostatic transmission is frequently mentioned as a positive feature, making the tractor easy to operate for users of various skill levels.
Some long-term owners report putting hundreds of hours on their 2025R with minimal issues, citing good reliability and durability. The tractor’s compact size combined with its capabilities makes it popular among both homeowners with larger properties and small-scale farmers.
While most reviews are positive, some users mention wanting more power for certain tasks or finding the gear ranges not ideal for all applications. However, these criticisms are generally minor compared to the overall satisfaction expressed by most reviewers.
In summary, the John Deere 2025R is widely regarded as a capable, versatile, and reliable compact utility tractor that offers a good balance of power and maneuverability for a wide range of users and applications.
John Deere 2025r v 1025r
The John Deere 2025R and 1025R are both compact utility tractors, but they have several key differences:
Size and Power:
2025R: 24.2 hp engine, 18 hp PTO
1025R: 23.9 hp engine, 17.2 hp PTO
The 2025R is slightly more powerful and larger overall.
Weight:
2025R: Approximately 1,793 lbs (814 kg)
1025R: Approximately 1,556 lbs (706 kg)
The 2025R is heavier, providing better stability for larger implements.
Lift Capacity:
2025R: 882 lbs (400 kg) at 24 inches behind link arms
1025R: 681 lbs (309 kg) at 24 inches behind link arms
The 2025R has a significantly higher lift capacity.
Hydraulic Flow:
2025R: 5.6 gpm (21.2 L/min) total
1025R: 5.3 gpm (20.1 L/min) total
The 2025R offers slightly higher hydraulic flow.
Wheelbase:
2025R: 63 inches (160 cm)
1025R: 57.1 inches (145 cm)
The 2025R has a longer wheelbase, contributing to better stability.
Transmission:
Both models feature hydrostatic transmissions, but the 2025R typically offers smoother operation.
Attachments:
While both are versatile, the 2025R is compatible with a wider range of attachments due to its higher capacity.
Comfort and Features:
The 2025R generally offers more comfort features and a more spacious operator area.
Price:
The 2025R is typically more expensive than the 1025R.
Use Cases:
1025R: Best for smaller properties, light-duty work
2025R: Suitable for larger properties, more demanding tasks
In summary, while both tractors are capable machines, the 2025R offers more power, capacity, and features, making it better suited for more demanding applications and larger properties. The 1025R, being smaller and less expensive, is ideal for lighter duties and smaller areas.
John Deere 2025r Dimensions
The John Deere 2025R compact utility tractor has the following key dimensions:
Wheelbase: 63 inches (160 cm)
Length: 111 inches (281 cm)
Width: 48 inches (121 cm)
Height (with ROPS): 94 inches (238 cm)
Ground clearance (front axle): 12.5 inches (31 cm)
Front tread width: 95.3 inches (242 cm)
Turning radius (without brakes): 9 feet (3 m)
Weight:
– ROPS model: 1,872 lbs (849 kg)
– Cab model: 2,392 lbs (1,085 kg)
Maximum weight capacity:
– Front axle: 1,349 lbs (611 kg)
– Rear axle: 2,425 lbs (1,099 kg)
The compact design of the 2025R allows for maneuverability in tight spaces while still providing a stable platform for various tasks. The tractor’s dimensions make it suitable for a wide range of applications, from landscaping to small-scale farming. The relatively high ground clearance enables the tractor to navigate rough terrain, while the balanced weight distribution contributes to its stability when using attachments or working on slopes.
John Deere 2025r Mower Deck
The John Deere 2025R compact utility tractor is compatible with several mid-mount mower deck options:
54D Mower Deck:
– Cutting width: 54 inches (137 cm)
– Hydraulic lift system
– Ideal for mowing large areas efficiently
– Adjustable cutting heights
60D Mower Deck:
– Cutting width: 60 inches (152 cm)
– Hydraulic lift system
– Covers more ground in less time than the 54-inch deck
Both decks feature:
– AutoConnect technology for easy attachment and detachment
– Drive-over design for simple installation
– Three blades for a quality cut
– Optional mulching kits available
– Cut height range of 1 to 4 inches
The mower decks are designed with a flat-top and deep draw, which allows for better grass flow and reduced clumping. They have a wider and higher discharge opening for even clipping dispersal, resulting in an excellent finished appearance.
Key advantages of these mid-mount decks include:
– Compact design, improving maneuverability around obstacles
– Sits underneath the tractor, maintaining a small footprint
– Provides a high-quality cut on various terrains
– Easy to use in smaller areas compared to rear-mount options
Some considerations:
– Low ground clearance when attached, which may limit use of other implements
– Requires careful alignment when attaching or detaching
For easier maintenance, the Load-N-Go system is available for the 60-inch deck. This allows the operator to remove the deck and attach it to the loader arms for easy lifting and access to the underside.
The mid-mount mower decks for the 2025R offer a balance of efficiency, cut quality, and ease of use, making them popular choices for maintaining large lawns and small acreages.
John Deere 2025r Horsepower
The John Deere 2025R compact utility tractor has the following horsepower specifications:
Engine gross power: 23.9 hp (17.8 kW)
This is the total power produced by the engine before any power is used to run accessories or drivetrain components.
Power take-off (PTO) power: 18 hp (13.4 kW)
This represents the usable power available at the PTO for running implements and attachments.
The tractor is equipped with a Yanmar 3TNV80F diesel engine, which is a 3-cylinder unit with a displacement of 77.3 cubic inches (1.267 liters). This engine meets Final Tier 4 emissions standards.
Key engine specifications related to power:
– Rated engine speed: 3200 rpm
– Engine torque at rated speed: 53.1 Nm (39.1 lb-ft)
– Fuel consumption: Approximately 1.5 gallons per hour (5.7 liters per hour)
The 2025R’s power output places it in a category suitable for a wide range of tasks on small farms, large properties, and landscaping operations. It offers a good balance of power and efficiency for its size class, making it versatile enough for mowing, loader work, and light tillage operations.
John Deere 2025r Parts Diagram
The John Deere 2025R compact utility tractor consists of several key components and systems. Here’s a summary of the main parts typically found in a parts diagram:
Engine:
– Yanmar 3TNV80F diesel engine
– Air intake system with air filter
– Fuel system including fuel tank, lines, and injectors
– Cooling system with radiator and water pump
– Exhaust system
Transmission and Drivetrain:
– Hydrostatic transmission
– Front and rear axles
– Differential
– Drive shafts
Hydraulic System:
– Hydraulic pump
– Control valves
– Hydraulic lines and fittings
– Hydraulic fluid reservoir
Three-Point Hitch:
– Top link
– Lower links
– Lift arms
– Lift cylinders
Power Take-Off (PTO):
– Rear PTO shaft
– Mid PTO shaft (if equipped)
– PTO clutch assembly
Steering System:
– Steering wheel
– Steering column
– Power steering pump
– Steering cylinder
Electrical System:
– Battery
– Alternator
– Starter motor
– Wiring harness
– Fuse box
Operator Station:
– Seat
– Control levers and pedals
– Instrument panel
– ROPS (Roll-Over Protective Structure)
Wheels and Tires:
– Front and rear wheels
– Tires
Attachments and Implements:
– Front loader mounting points
– Mid-mount mower deck connection points
– Rear hitch receiver
Frame and Body:
– Main frame
– Hood and side panels
– Fenders
These components work together to provide the functionality and performance of the John Deere 2025R tractor. The specific layout and design may vary slightly depending on the production year and configuration of the tractor.
John Deere 2025r Length with Loader
The John Deere 2025R compact utility tractor has the following length specifications:
Base tractor length: 111 inches (281 cm)
When equipped with the John Deere 120R loader, which is commonly paired with the 2025R, the overall length increases. The exact length with the loader attached can vary slightly depending on the bucket position, but it is typically around:
Length with loader: Approximately 150-155 inches (381-394 cm)
It’s important to note that the length can change based on the specific configuration of the loader and the type of bucket or attachment being used. The loader can be easily removed when not needed, returning the tractor to its base length.
The compact design of the 2025R, even with the loader attached, allows for good maneuverability in tight spaces while still providing the functionality of a larger tractor. This balance of size and capability makes it popular for both residential and small agricultural applications.
When considering storage or transportation, it’s advisable to account for the maximum length with the loader attached to ensure adequate space.
John Deere 2025r Width
The John Deere 2025R compact utility tractor has the following width specifications:
Minimum width: 37 inches (93 cm)
Maximum width: 51 inches (129 cm)
The width can vary depending on the specific tire configuration and any attachments installed on the tractor. The narrower width allows for better maneuverability in tight spaces, while the wider configuration provides more stability for certain applications.
Some sources indicate a width of 48 inches (121 cm), which likely represents a common configuration.
The tractor’s front tread width is approximately 31.1 inches (78 cm).
It’s important to note that the overall width can change based on the type of tires installed and whether dual wheels are used. When considering the 2025R for specific applications or storage spaces, it’s advisable to account for the maximum width to ensure adequate clearance.
The compact width of the 2025R contributes to its versatility, allowing it to navigate through gates, barns, and other confined areas while still providing a stable platform for various tasks.
John Deere 2025r Pallet Forks
The John Deere 2025R compact utility tractor is compatible with pallet fork attachments designed for its loader system. Here’s a summary of pallet fork options for the 2025R:
Compatibility:
Pallet forks are typically designed to fit the John Deere 120R loader, which is commonly used with the 2025R tractor.
Attachment System:
Most pallet forks for the 2025R use the hook and pin system to attach to the loader.
Capacity:
Pallet fork attachments for the 2025R generally have a lifting capacity ranging from 1,000 to 4,000 pounds, depending on the specific model.
Fork Dimensions:
Standard fork lengths are typically around 42 inches, but can vary.
Fork width is usually adjustable to accommodate different pallet sizes.
Frame Features:
Many pallet fork frames include a backrest or “headache rack” for added stability when moving loads.
Some frames have an integrated 2-inch receiver hitch for additional versatility.
Construction:
Frames are typically made of heavy-duty steel and powder-coated for durability.
Forks are usually forged steel for strength and longevity.
Additional Features:
Some models offer the ability to add stabilizer spears for handling round bales.
Certain frames are designed as multi-purpose attachments, allowing for easy switching between pallet forks and hay spears.
Weight:
The weight of pallet fork attachments for the 2025R typically ranges from 90 to 120 pounds, not including the forks themselves.
When selecting pallet forks for a John Deere 2025R, it’s important to consider the specific loader model, the intended use, and the weight of materials to be moved to ensure proper fit and safe operation.
John Deere 2025r Hydraulic Fluid
The John Deere 2025R compact utility tractor uses a hydraulic system with the following specifications:
Hydraulic fluid type: John Deere Hy-Gard transmission/hydraulic oil is recommended
Hydraulic system capacity: 3.8 gallons (14.4 liters)
Hydraulic system type: Open center
Maximum operating pressure: 2150 psi (148.2 bar)
Total hydraulic flow: 7 gpm (26.5 lpm)
Implement pump flow: 3.5 gpm (13.2 lpm)
Steering pump flow: 3.5 gpm (13.2 lpm)
The hydraulic fluid in the 2025R serves multiple purposes, including powering the power steering system, operating the three-point hitch, and running hydraulic implements. It’s important to maintain the proper fluid level and change the fluid according to the manufacturer’s recommended maintenance schedule to ensure optimal performance and longevity of the hydraulic components.
When refilling or changing the hydraulic fluid, it’s crucial to use the recommended John Deere Hy-Gard oil or an equivalent that meets John Deere’s specifications to protect the system components and maintain warranty coverage.
John Deere 2025r Grapple
The John Deere 2025R compact utility tractor is compatible with several grapple attachments designed for its loader system. Here’s a summary of grapple options for the 2025R:
Types of Grapples:
1. Root Grapples: Designed for handling brush, roots, and debris.
2. Mechanical Grapples: Operate without the need for a third hydraulic function.
Key Features:
– Quick-change attachment system for easy connection to the loader
– Replaceable, weld-on wear tips for durability
– Integrated base support to prevent tipping when detached
– Greased pivot points for easy maintenance
Dimensions and Specifications:
– Typical cutting width: 53-54 inches (134-137 cm)
– Grapple opening: Around 36 inches (91 cm)
– Height: Approximately 25 inches (63.5 cm)
– Depth: About 23 inches (58.9 cm)
– Weight: 200-300 lbs (90-136 kg) depending on the model
Capacity:
– Lift capacity varies by model, typically ranging from 1000 to 1200 lbs (454-544 kg)
Compatibility:
– Designed to work with John Deere 120R, 220R, and 300E Loaders
– Some models are only compatible with non-self-leveling (NSL) loaders
Construction:
– Heavy-duty steel construction
– Powder-coated finish for durability
– Some models feature reinforced JDQA (John Deere Quick Attach) hooks
Additional Features:
– Some grapples offer adjustable tine spacing
– Certain models include chain slots for securing loads
– Options for different numbers of upper and lower tines
Grapple attachments for the John Deere 2025R enhance its versatility, allowing for efficient handling of various materials like brush, logs, rocks, and debris. The choice of grapple depends on specific task requirements and loader compatibility.
John Deere 2025r Wheel Weights
The John Deere 2025R compact utility tractor can be equipped with wheel weights to improve traction and stability. Here’s a summary of wheel weight options for the 2025R:
Rear wheel weights:
– Cast iron weights are available in 42 lb (19 kg) and 70 lb (32 kg) sizes
– These can be mounted on the rear wheels in various combinations
– Typically, up to three weights can be mounted per wheel
Front wheel weights:
– Cast iron weights are available in 37 lb (17 kg) sizes
– These can be mounted on the front wheels
Suitcase weights:
– Can be added to the front of the tractor
– Available in 42 lb (19 kg) increments
– Up to 6 suitcase weights can be added, for a total of 252 lbs (114 kg)
The addition of wheel weights can help improve the tractor’s performance in several ways:
– Increased traction, especially useful when using implements or working in slippery conditions
– Better stability when using front-end loaders or other attachments
– Improved balance, particularly when using rear-mounted implements
When adding wheel weights, it’s important to consider the tractor’s maximum weight capacity and to distribute the weight evenly. The specific number and configuration of weights used can be adjusted based on the tasks being performed and the implements being used with the 2025R.
John Deere 2025r 3 Point Hitch
The John Deere 2025R compact utility tractor is equipped with a 3-point hitch with the following specifications:
Type: Limited Category 1
Lift capacity at 24 inches behind link arms: 915 lbs (415 kg)
The 3-point hitch features:
– Position control for precise implement positioning
– Telescoping draft links for easy implement attachment
– Flexible link ends for simpler hookup
– Adjustable lift rods for leveling implements side-to-side
– Extendable lower links to accommodate various implement sizes
The hitch is compatible with a wide range of Category 1 implements, including:
– Rotary tillers
– Box blades
– Rear blades
– Landscape rakes
– Post hole diggers
– Seeders and planters
The 2025R’s 3-point hitch system is designed for easy use and versatility. It allows for quick attachment and detachment of implements, making it efficient for switching between different tasks. The position control feature enables precise depth control for consistent performance across various applications.
The hitch system is supported by the tractor’s hydraulic system, which provides a total flow of 7 gpm (26.5 L/min) and operates at a maximum pressure of 2,150 psi (148.2 bar).
John Deere 2025r Fuel Capacity
The John Deere 2025R compact utility tractor has the following fuel capacity specifications:
Fuel tank capacity: 6.3 gallons (23.8 liters)
Fuel type: Diesel
The fuel system features:
– Indirect injection
– Auto-bleed functionality for easy priming if the tractor runs out of fuel
– Fuel filter with a replaceable element for easy maintenance
Fuel consumption: Approximately 1.5 gallons per hour (5.7 liters per hour) under typical operating conditions
The fuel tank capacity allows for extended operation without frequent refueling, making it suitable for longer work sessions on larger properties or for tasks that require continuous use. The efficient fuel consumption rate contributes to the tractor’s overall economy of operation.
The fuel tank is designed for easy access and refilling. The auto-bleed fuel system eliminates the need for manual bleeding if the tractor runs out of fuel, providing convenient and quick fuel recovery.
John Deere 2025r Snowblower
The John Deere 2025R compact utility tractor is compatible with snowblower attachments, enhancing its winter utility. Here’s a summary of snowblower options for the 2025R:
Compatible snowblower models:
– 47-inch (119 cm) snowblower
– 54-inch (137 cm) snowblower
Key features:
– Front-mounted attachment
– Two-stage design for efficient snow removal
– Hydraulically powered
– Quick-attach system for easy installation and removal
Snowblower specifications:
– Cutting width: 47 inches (119 cm) or 54 inches (137 cm)
– Cutting height: Typically around 20-22 inches (51-56 cm)
– Chute rotation: 180 degrees
– Deflector adjustment: Manual or hydraulic, depending on the model
The snowblower attachments for the 2025R are designed to clear snow from driveways, paths, and other areas efficiently. They can handle various snow conditions, from light powder to heavy, wet snow.
Installation requires:
– Front hitch
– Front PTO
– Hydraulic couplers
Some models may offer additional features such as:
– Skid shoes for adjusting the cutting height
– Replaceable wear edges for extended service life
– Optional drift cutters for handling deeper snow
When using a snowblower with the 2025R, it’s recommended to add rear ballast or wheel weights to improve traction and stability. The specific snowblower model and features may vary, so it’s advisable to consult with a John Deere dealer for the most suitable option for your 2025R tractor and snow removal needs.
John Deere 2025r Warranty
The John Deere 2025R compact utility tractor comes with the following warranty coverage:
Standard Warranty:
– 2-year or 2000-hour comprehensive warranty (whichever comes first)
– 6-year or 2000-hour powertrain warranty (whichever comes first)
The comprehensive warranty covers the entire tractor for defects in materials and workmanship. The powertrain warranty specifically covers major components of the engine, transmission, and drivetrain.
Extended Warranty Options:
– PowerGard Protection Plan: Offers additional coverage after the standard warranty expires
– Available in various terms, typically up to 4 additional years or 1000 hours
Key points about the warranty:
– Begins on the date of delivery to the original purchaser
– Covers defects in materials and workmanship
– Does not cover normal wear and tear items or maintenance parts
– Warranty work must be performed by an authorized John Deere dealer
– Transportation costs for warranty work are the responsibility of the owner
Items typically not covered:
– Normal maintenance items (filters, fluids, belts, etc.)
– Damage due to misuse, accidents, or lack of proper maintenance
– Modifications or alterations not approved by John Deere
It’s important to note that specific warranty terms and conditions may vary, and it’s advisable to consult the warranty document provided with the tractor or contact a John Deere dealer for the most accurate and up-to-date warranty information.
John Deere 2025r Maintenance
The John Deere 2025R requires regular maintenance to ensure optimal performance and longevity. Here’s a summary of key maintenance tasks:
Engine Oil and Filter:
– Change initially at 50 hours, then every 200 hours or annually
– Use Plus-50 oil; capacity is 3.2 L (0.84 gal)
Transmission and Hydraulic System:
– Use Hy-Gard fluid; capacity is 13.1 L (3.5 gal)
– Change transmission oil filter initially at 50 hours, then every 200 hours
– Clean suction screen every 200 hours
Fuel System:
– Replace fuel filter every 400 hours or annually
– Fuel tank capacity is 23 L (6.1 gal)
Air Filter:
– Replace primary and secondary elements as needed based on conditions
– Check air filter restriction indicator regularly
Cooling System:
– Use Cool-Gard II coolant; capacity is 3.2 L (0.84 gal)
– Check coolant level regularly
Front Axle:
– Use GL-5 fluid; capacity is 3.4 L (0.89 gal)
General Maintenance:
– Lubricate all grease points regularly
– Inspect belts and hoses for wear
– Clean radiator and engine compartment to prevent overheating
– Check and adjust tire pressure as needed
Daily Checks:
– Engine oil level
– Coolant level
– Hydraulic fluid level
– Fuel level
– Air filter restriction indicator
The tractor features easy access to service points, including:
– External hood latch for tool-free access
– Removable side panels for engine compartment access
– Conveniently located filters for easy replacement
It’s recommended to follow the maintenance schedule in the operator’s manual and perform regular inspections to catch any potential issues early. Proper maintenance will help ensure the 2025R’s reliability and performance over time.
John Deere 2025r Parts List
The John Deere 2025R compact utility tractor consists of several key components and systems. Here’s a summary of the main parts typically found on a 2025R:
Engine:
– Yanmar 3TNV80F diesel engine
– Air intake system with dual element air filter
– Fuel system including fuel tank, lines, and injectors
– Cooling system with water pump and radiator
– Exhaust system
Transmission and Drivetrain:
– Hydrostatic transmission with two ranges
– Front and rear axles
– Differential with lock
– Drive shafts
Hydraulic System:
– Open center hydraulic system
– Gear-type hydraulic pump
– Control valves
– Hydraulic lines and fittings
– Hydraulic fluid reservoir
Three-Point Hitch:
– Limited Category 1 hitch
– Top link
– Lower links
– Lift arms
– Lift cylinders
Power Take-Off (PTO):
– Rear PTO (540 rpm)
– Mid PTO (2100 rpm)
– PTO clutch assembly
Steering System:
– Power steering
– Steering wheel and column
– Steering cylinder
Electrical System:
– 12V battery (500 CCA)
– 40 amp alternator
– Starter motor (1.2 kW)
– Wiring harness
– Fuse box
Operator Station:
– Foldable ROPS (Roll-Over Protective Structure)
– Seat
– Control levers and pedals
– Instrument panel
– Tilt steering wheel
Wheels and Tires:
– Front tires (various options available)
– Rear tires (various options available)
Frame and Body:
– Main frame
– Hood and side panels
– Fenders
Additional Components:
– Fuel tank (20.4 L capacity)
– Toolbox
– 12V outlet
This parts list covers the major components of the John Deere 2025R. The tractor’s modular design allows for easy maintenance and replacement of individual parts as needed.
John Deere 2025r Parts Manual
The John Deere 2025R parts manual provides detailed information on replacement parts and maintenance for this compact utility tractor. Key sections include:
Engine:
– Oil filter (change every 200 hours or annually)
– Air filters (primary and secondary)
– Fuel filter and element
– Engine oil specifications
Electrical:
– Battery
– LED work lights
– Headlights
– Rotary switch
Fuel and Air:
– Fuel filter assembly
– Air filter elements
Axle:
– Tie rod assembly
– Front axle oil specifications
Transmission/Hydraulic:
– Transmission/hydraulic oil type and capacity
– Hydraulic filter
Additional Components:
– Filler cap
– Grease specifications
– Grease gun
The manual provides part numbers, replacement intervals, and fluid capacities for easy reference. It covers components across major systems including the engine, electrical, fuel, axle, and transmission/hydraulics.
Maintenance schedules are included, specifying when to change fluids and filters. For example:
– Engine oil and filter: Every 200 hours or annually
– Fuel filter: Every 400 hours or annually
– Air filters: Primary as needed, secondary every 600-1200 hours
The parts manual is an essential reference for owners and technicians to properly maintain the John Deere 2025R tractor and order correct replacement parts when needed. It ensures the use of proper fluids, filters, and components to keep the tractor running optimally.
John Deere 2025r Brush Hog
The John Deere 2025R compact utility tractor is compatible with several brush hog (rotary cutter) options. Here’s a summary of brush hog considerations for the 2025R:
Compatible sizes:
– 4-foot (48-inch) brush hogs are generally recommended
– Some 5-foot (60-inch) models may be usable, but with reduced performance
Popular models:
– Frontier RC2048 (48-inch)
– Land Pride RCR1248 (48-inch)
– Woods BB48X (48-inch)
Key considerations:
– The 2025R has 18 PTO horsepower, which limits the size of brush hog it can effectively operate
– A 48-inch brush hog is typically the largest recommended size for this tractor
– Using a 60-inch brush hog may result in slower ground speeds and reduced cutting performance
Attachment:
– Connects to the Category 1 three-point hitch
– Uses the 540 rpm rear PTO
Performance:
– Can handle light to moderate brush and saplings up to about 1-inch diameter
– Best suited for maintaining fields, trails, and lightly wooded areas
– May struggle with very dense or heavy brush
Additional notes:
– Adding rear wheel weights or filling tires with fluid can improve traction and stability
– A slip clutch on the brush hog is recommended to protect the tractor’s PTO
– Regular maintenance of both tractor and brush hog is crucial for optimal performance
When choosing a brush hog for the John Deere 2025R, it’s important to consider the specific terrain and vegetation to be managed, as well as the tractor’s power limitations. A 48-inch model typically provides the best balance of cutting width and performance for this tractor.
John Deere 2025r TLB,
The John Deere 2025R can be equipped as a Tractor Loader Backhoe (TLB) configuration, combining the versatility of a compact utility tractor with loader and backhoe attachments. Here’s a summary of the 2025R TLB setup:
Tractor:
– 24.2 hp Yanmar diesel engine
– Hydrostatic transmission with two ranges
– Four-wheel drive
– Category 1 three-point hitch
Loader:
– John Deere 120R loader is typically used
– Quick-attach system for easy installation/removal
– Lift capacity at full height (at pivot pins): approximately 1,190 lbs (540 kg)
– Breakout force: around 2,350 lbs (1,066 kg)
– Bucket options ranging from 48 to 61 inches wide
Backhoe:
– John Deere 260B backhoe is the compatible model
– Dig depth: approximately 7.5 feet (2.3 m)
– Reach from pivot: around 10.8 feet (3.3 m)
– Bucket rotation: 180 degrees
– Swing arc: 150 degrees
– Stabilizer spread: about 6.2 feet (1.9 m)
The TLB configuration enhances the 2025R’s versatility, allowing it to perform a wide range of tasks including digging, trenching, material handling, and general property maintenance. The backhoe is removable, allowing the tractor to be used with other implements when needed.
Key advantages of the 2025R TLB setup include:
– Compact size for maneuverability in tight spaces
– Versatility for various applications
– Quick attachment/detachment of loader and backhoe
– Comfortable operator station with easy-to-use controls
When configured as a TLB, the 2025R becomes a highly capable machine for landscaping, construction, and agricultural applications, offering the functionality of larger machines in a more compact and maneuverable package.
