John Deere 3038
The John Deere 3038E is a compact utility tractor that has been in production since 2008. It is part of the 3 Series tractors and is manufactured in Augusta, Georgia, USA. The tractor is powered by a Yanmar 1.5L 3-cylinder diesel engine, which delivers 37.1 horsepower (27.7 kW) gross and 36.3 horsepower (27.1 kW) net. The power take-off (PTO) provides 30 horsepower (22.4 kW).
This tractor features a four-wheel drive system with power steering and wet disc brakes. It comes standard with a two-post folding Rollover Protection Structure (ROPS), with an optional cab available. The 3038E offers two transmission options: a 12-speed power shuttle or a hydrostatic transmission.
The hydraulic system is an open center type with a capacity of 5.5 gallons (20.8 L). It has a total flow rate of 9.3 gallons per minute (35.2 L/min), with 5.3 gpm (20.1 L/min) dedicated to implements and 4.0 gpm (15.1 L/min) for steering.
The 3038E is equipped with a Category 1 three-point hitch, capable of lifting 1,356 pounds (615 kg) at 24 inches behind the lift arms. It features an independent rear PTO with 540 rpm capability.
The tractor’s dimensions include a 60-inch (152 cm) wheelbase and a weight of 2,175 pounds (986 kg). It runs on 7.00-14 front tires and 11.2-24 rear tires.
For fuel, the 3038E has a tank capacity of 6.4 gallons (24.2 L). The electrical system includes a 40-amp alternator and a 12-volt battery with 500 cold cranking amps.
The John Deere 3038E is designed for versatility and can be equipped with various attachments, including a front-end loader, making it suitable for a wide range of agricultural, landscaping, and light construction tasks.
John Deere 3038 Price
The price of the John Deere 3038E varies depending on factors such as condition, year, and location. Historically, its original price was $14,869 in 2009 and increased to $20,669 by 2016. For newer models, prices typically range from $18,500 to $23,800 for base configurations. Used models can be found for as low as $9,200 or as high as $57,399, depending on hours of use and additional features. Pricing may also differ across regions and dealerships.
The price of the John Deere 3038E varies depending on factors such as condition, year, and location. Historically, its original price was $14,869 in 2009 and increased to $20,669 by 2016. For newer models, prices typically range from $18,500 to $23,800 for base configurations. Used models can be found for as low as $9,200 or as high as $57,399, depending on hours of use and additional features. Pricing may also differ across regions and dealerships.
John Deere 3038 Finance Options
As of March 2025, John Deere offers several attractive financing options for the 3038E compact utility tractor. These options are designed to make ownership more accessible and affordable for various types of buyers.
One of the most appealing offers is 0% APR fixed rate financing for 60 months on the purchase of new John Deere 3E Series Compact Tractors, which includes the 3038E model. This offer also comes with an additional $250 off the purchase price, making it an excellent opportunity for buyers looking to minimize their interest costs.
For those prioritizing lower monthly payments, John Deere provides a plan with payments as low as $369 per month. This option includes 0% financing for 84 months, allowing buyers to spread the cost over a longer period without incurring interest charges.
Buyers who prefer to pay in cash can take advantage of significant savings. John Deere offers up to $2,000 off on cash purchases for select compact tractor models, which may include the 3038E depending on current promotions.
An additional incentive includes a $250 savings when purchasing two new implements along with the tractor. This offer can help buyers outfit their 3038E with necessary attachments at a reduced cost.
For those who prefer not to purchase outright, leasing options are available. These typically include various terms and can be structured to suit different operational needs and budgetary constraints.
John Deere Financial offers customized finance packages that can include options to bundle in service and maintenance costs, providing a more comprehensive financial solution for tractor ownership.
It’s important to note that these finance options are subject to credit approval and may vary based on the specific dealer and region. Interested buyers should contact their local John Deere dealer for the most up-to-date and personalized financing information for the 3038E tractor.
John Deere 3038 Specs
The John Deere 3038E is powered by a Yanmar 1.5L 3-cylinder diesel engine. This engine delivers 37.1 horsepower (27.7 kW) gross and 36.3 horsepower (27.1 kW) net. The power take-off (PTO) provides 30 horsepower (22.4 kW). The engine operates at a rated speed of 2500 rpm and features a high-pressure common rail direct injection system. It is turbocharged and compliant with Final Tier 4 emissions standards.
This compact utility tractor comes with two transmission options: a hydrostatic transmission or a power shuttle. It features a four-wheel drive system, power steering, and wet disc brakes for efficient operation and control.
The 3038E is equipped with an open center hydraulic system with a capacity of 5.5 gallons (20.8 L). The system operates at a pressure of 2500 psi (172.4 bar) and has a total flow rate of 9.3 gallons per minute (35.2 L/min). The pump flow dedicated to implements is 5.3 gpm (20.1 L/min), while 4.0 gpm (15.1 L/min) is allocated for steering.
The tractor has a wheelbase of 60 inches (152 cm) and an overall length of 111 inches (281 cm). Its width ranges from 56.5 to 58 inches (143 to 147 cm). The height to the top of the hood is 51 inches (129 cm), while the height with the ROPS extended is 82.3 inches (209 cm). The operating weight of the 3038E is 2,175 lbs (986 kg), with a maximum weight capacity of 4,410 lbs (2000 kg).
Standard agricultural tires for the 3038E are 7.00-14 for the front and 11.2-24 for the rear. Alternative options include lawn/turf tires and industrial tires for different applications.
The 3038E comes with a Category 1 three-point hitch capable of lifting 1,356 pounds (615 kg) at 24 inches behind the lift arms. It features an independent rear PTO with 540 rpm capability. The tractor is equipped with a 6.4-gallon (24.2 L) fuel tank and a 12-volt electrical system with a 500 CCA battery.
The John Deere 3038E can be equipped with various attachments, including a front-end loader, making it versatile for a wide range of agricultural, landscaping, and light construction tasks.
John Deere 3038 Parts
The John Deere 3038E requires regular maintenance and replacement of various engine components. Key engine parts include:
-
Oil filter (replace every 200 hours or annually)
-
Fuel filter (replace every 400 hours or annually)
-
Air filters (primary and secondary, check or replace every 600 hours)
-
Fuel/water separator
-
Fan belt
-
Thermostat and gaskets
Essential hydraulic system parts for the 3038E include:
-
Hydraulic oil filter (replace every 400 hours)
-
Transmission/hydraulic oil filter (replace after initial 50 hours, then every 400 hours)
Important electrical parts for the 3038E tractor include:
-
Battery
-
Headlight and tail light bulbs
-
Various switches (headlight, PTO, turn signal, cruise control)
-
Key
John Deere offers filter paks for the 3038E, which include:
-
Oil filter
-
Air filter
-
Fuel filter
-
Hydraulic filter
These kits provide a complete solution for routine maintenance.
The 3038E is compatible with various attachments and accessories, including:
-
Front-end loader
-
Trailer mover
-
Tool storage racks
-
iMatch Quick-Hitch
-
Ballast box
-
Canopies and lighting kits
Other parts that may need replacement or maintenance include:
-
Radiator hoses (upper and lower)
-
Fuel filler cap
-
Seat
-
Tires (front: 7.00-14, rear: 11.2-24)
Regular maintenance and timely replacement of these parts will help ensure optimal performance and longevity of the John Deere 3038E compact utility tractor.
John Deere 3038 Weight
The John Deere 3038E compact utility tractor has a standard operating weight of 2,175 pounds (986 kg). This weight refers to the base model without any additional attachments or implements.
The maximum weight capacity of the John Deere 3038E is 4,410 pounds (2,000 kg). This represents the total weight the tractor can safely support, including its own weight plus any additional load from attachments, cargo, or ballast.
For shipping purposes, the approximate weight of the John Deere 3038E is 2,222 pounds (1,007.9 kg) for the open-station model. This may vary slightly depending on the specific configuration and any additional features included.
The weight of the John Deere 3038E is well-distributed to provide stability during operation. The four-wheel drive system and the tractor’s design help maintain balance across various terrains and working conditions.
It’s important to note that the weight of the tractor can increase significantly when equipped with attachments such as a front-end loader, backhoe, or other implements. Operators should always consider the additional weight of attachments when calculating the total operating weight and ensuring it remains within the maximum weight capacity.
John Deere 3038 Horsepower
The John Deere 3038E is equipped with a Yanmar 3-cylinder diesel engine that provides a gross engine power of 37.1 to 37.3 horsepower, depending on specific configurations. This ensures reliable performance for a variety of agricultural and utility tasks.
The net engine horsepower is rated at 36.3 horsepower, reflecting the usable power after accounting for internal system losses.
The tractor delivers a power take-off (PTO) output of 30 horsepower, making it suitable for operating various attachments such as mowers, tillers, and other PTO-driven implements.
John Deere 3038 Oil Filter
The John Deere 3038E uses the oil filter model M806419. This filter is designed specifically for John Deere machinery equipped with 3 or 4 cylinder Yanmar diesel engines.
The oil filter should be replaced every 200 hours of operation or annually, whichever occurs first. This regular maintenance helps ensure optimal engine performance and longevity.
While designed for the 3038E, this oil filter is also compatible with various other John Deere models, including:
-
Compact utility tractors: 2025R, 2032R, 3032E, 3036E
-
Larger utility tractors: 4105, 4115, 4200, 4210
-
Landscaping equipment: 770, 790, 1070
The M806419 oil filter is engineered to meet John Deere’s strict quality standards. It effectively removes contaminants from the engine oil, protecting critical engine components from wear and damage.
When changing the oil filter:
-
Ensure the engine is cool before starting
-
Drain the old oil completely
-
Apply a thin film of clean oil to the new filter gasket
-
Hand-tighten the filter; do not use tools
-
Refill with the appropriate amount and type of engine oil
-
Run the engine briefly to check for leaks
Regular oil and filter changes are crucial for maintaining the performance and extending the life of your John Deere 3038E tractor.
John Deere 3038 Oil Capacity
The John Deere 3038E compact utility tractor has an engine oil capacity of 4.5 liters (4.8 quarts) when including the oil filter. This capacity ensures proper lubrication of the engine components during operation.
The transmission and hydraulic system of the John Deere 3038E has a significantly larger oil capacity of 20.8 liters (22 quarts). This larger volume is necessary to maintain proper hydraulic pressure and lubrication for the transmission components and hydraulic systems.
The front axle of the John Deere 3038E requires 3.8 liters (4 quarts) of oil. This ensures proper lubrication of the front axle components, which is crucial for the four-wheel drive system’s performance.
For optimal performance and longevity of the tractor, it is recommended to change the engine oil and filter every 200 hours or annually, whichever comes first. The transmission and hydraulic system oil should be changed every 400 hours, while the front axle oil change interval is set at 600 hours.
John Deere recommends using specific oil types for each system:
-
Engine: John Deere Plus-50 II Premium 10W-30 oil
-
Transmission/Hydraulic: John Deere Low Viscosity Hy-Gard
-
Front Axle: John Deere Low Viscosity Hy-Gard
Using the correct oil types and maintaining proper oil levels is essential for the optimal performance and longevity of the John Deere 3038E tractor.
John Deere 3038 Parts Diagrams,
The John Deere 3038E compact utility tractor has several major component groups represented in parts diagrams:
This diagram includes essential engine parts such as:
-
Oil pressure switch
-
Temperature sender
-
Fuel filters
-
Air filters (primary and secondary)
Key electrical parts shown in the diagram:
-
Starter motor (12V, 13 tooth, 1.4KW)
-
Battery
-
Headlights and work lights
The cooling system diagram features:
-
Radiator
-
Radiator fan (14.125″ diameter plastic fan with metal hub)
-
Radiator cap (1.98 PSI)
This section illustrates:
-
Clutch components
-
PTO discs
-
Transmission parts
The fuel system diagram shows:
-
Fuel pump
-
Fuel lines
-
Fuel/water separator
This diagram includes:
-
Hydraulic pumps
-
Hydraulic filters
-
Hydraulic lines and fittings
Parts shown in this section:
-
Frame components
-
Fenders
-
Hood
This diagram illustrates:
-
Seat
-
Control levers
-
Instrument panel
These diagrams provide a comprehensive visual representation of the John Deere 3038E’s components, aiding in parts identification and maintenance tasks.
FAQ
Warranty periods vary by product, but typically range from 1-3 years for most equipment. Some components may have longer warranties.
Parts can be found through local John Deere dealers, the official John Deere website, or authorized online retailers. You’ll need your model number and serial number to ensure you get the correct parts.
Service intervals depend on the model and usage, but generally, basic maintenance should be performed every 50-100 hours of operation or annually, whichever comes first.
While you can use aftermarket parts, John Deere recommends using genuine parts to ensure optimal performance and to maintain warranty coverage.
Model numbers typically indicate the series, horsepower, and specific features of the equipment. The first digit often represents the series, while subsequent numbers may indicate horsepower or other specifications.
Most John Deere equipment uses standard diesel fuel or gasoline, depending on the engine type. Some newer models may be compatible with biodiesel blends.
Winterization typically involves draining fuel or adding a stabilizer, removing the battery, cleaning the deck, and storing the tractor in a dry place.
John Deere recommends using their branded engine oils, but any oil meeting the specifications listed in your operator’s manual will suffice.
Deck adjustment procedures vary by model but generally involve adjusting the lift link and leveling the deck side-to-side and front-to-back.
Yes, John Deere offers operator training through their dealerships and online resources, including manuals and video tutorials.
Common steps include checking the battery, fuel supply, and electrical connections. If these basic checks don’t resolve the issue, consult your manual or a dealer.
Gators are John Deere’s line of utility vehicles, designed for various tasks. They often have unique features tailored for agricultural or commercial use compared to recreational UTVs.
Regular maintenance includes checking fluid levels, replacing filters as scheduled, and inspecting hoses and fittings for leaks or damage.
Many John Deere products can be upgraded or modified with approved attachments and accessories. However, unauthorized modifications may void your warranty.
Customer support can be reached through local dealers, the official John Deere website, or by phone. Support options may vary by region and product line.