John Deere 826 Snowblower
The John Deere 826 snowblower is a walk-behind snow removal machine designed for clearing snow from driveways and walkways. Here are some key details about this model:
Engine and Power:
The 826 features an 8 horsepower Tecumseh engine, specifically the HMSK80-155568V model. It has a single-cylinder, four-stroke cycle design with 5.9 kilowatts of power. The engine uses regular unleaded 87-octane gasoline and has a fuel tank capacity of 3.8 liters (4 quarts).
Physical Specifications:
– Clearing width: 26 inches
– Height: 42 inches (1,067 mm)
– Width: 26 inches (660 mm)
– Length: 51 inches (1,295 mm)
– Weight: 178 pounds
– Tire size: 12 inches by 4.1 inches
Features:
– Eight speed settings (six forward, two reverse)
– Electric start capability
– Adjustable discharge chute for directing snow
– Controls for traction drive, auger, speed selection, and chute direction
Performance:
Some users have reported that the 8 hp engine can struggle with heavy snowfalls, requiring operation at the slowest speed setting to prevent the engine from bogging down. The machine is generally more effective with lighter, fluffier snow conditions.
Maintenance:
The 826 may require periodic maintenance, including carburetor rebuilds and transmission repairs. The auger gearbox uses specialized oil for lubrication and protection.
Manufacturing:
John Deere snowblowers from this era were not always manufactured in-house. Between 1991 and 2001, some models were built by other companies such as Ariens and Murray under the John Deere brand.
While the exact manufacturing date of individual 826 models can be difficult to determine without additional information, these snowblowers were popular for home snow removal in the late 20th and early 21st centuries.
John Deere 826 Snowblower Parts and Parts List
The John Deere 826 snowblower parts list includes components for various systems of the machine:
Engine Parts:
– Tecumseh HMSK80 8 hp engine
– Spark plug
– Carburetor with adjustable jet
– Fuel tank (3.8 liter capacity)
– Air filter
– Oil filter
– Muffler
Drive System:
– Transmission
– Drive belts
– Friction wheel
– Axle
– Wheels (12 x 4.1 inch size)
Snow Handling Components:
– Auger
– Impeller
– Chute assembly
– Skid shoes
Controls:
– Traction drive lever
– Auger drive lever
– Speed selector lever
– Discharge chute control
– Throttle lever
– Choke knob
– Primer bulb
– Ignition key
– Electric start components
Frame and Body:
– Main frame
– Handlebars
– Control panel
– Belt covers
– Paint (John Deere yellow)
Miscellaneous:
– Bearings and bushings
– Hardware (bolts, nuts, washers)
– Cables and linkages
– Shear pins
– Auger gearbox oil
The parts list covers components that may need periodic replacement due to wear and tear, such as belts, spark plugs, and skid shoes. It also includes major assemblies like the engine, transmission, and auger that could potentially need service or rebuilding over the life of the machine.
Having access to the full parts list allows owners to identify and order the correct replacement components when maintenance is required.
Most Frequently Replaced Parts :
The most frequently replaced parts for the John Deere 826 Snowblower include:
Spark plug: This part often needs replacement due to regular wear and tear from engine operation.
Carburetor: The carburetor may require cleaning, rebuilding, or replacement, especially if the snowblower has been sitting unused for long periods.
Belts: Drive belts and auger belts can wear out over time and may need periodic replacement.
Skid shoes: These wear down with use and protect the auger housing from damage.
Shear pins: Designed to break to protect the auger and gearbox from damage, these are intentionally replaceable.
Fuel lines: Over time, fuel lines can deteriorate and may need replacement to prevent leaks.
Electric starter: The electric start mechanism can fail and may need repair or replacement.
Auger paddles or rubber: The rubber edges on the auger can wear down, reducing snow throwing efficiency.
Oil: Regular oil changes are necessary for proper engine maintenance.
Air filter: This should be replaced periodically to ensure proper engine performance.
Friction wheel: The rubber on the friction wheel can wear down, affecting the drive system.
Impeller bearing: This bearing can wear out over time, causing noise or reduced performance.
Chute control parts: The mechanism for controlling the discharge chute direction can break or wear out.
Primer bulb: This rubber component can crack or become brittle over time.
These parts are commonly replaced due to normal wear and tear, age-related deterioration, or damage from use. Regular maintenance and timely replacement of these components can help keep the John Deere 826 Snowblower operating efficiently and extend its overall lifespan.
John Deere 826 Snowblower Parts Diagram
The John Deere 826 snowblower parts diagram typically includes the following major components and assemblies:
Engine Assembly:
– Tecumseh 8 hp engine
– Carburetor
– Fuel tank
– Air filter
– Muffler
– Spark plug
– Recoil starter
Auger and Impeller Assembly:
– Auger blades
– Impeller fan
– Auger gearbox
– Shear pins
– Auger bearings
Drive System:
– Transmission
– Drive belts
– Friction wheel
– Axle
– Wheels
Chute Assembly:
– Discharge chute
– Chute deflector
– Chute rotation mechanism
Control System:
– Handlebar assembly
– Control levers (traction drive, auger engagement)
– Speed selector
– Chute control rod
Frame and Housing:
– Main frame
– Auger housing
– Belt covers
– Skid shoes
Electrical Components:
– Electric starter (if equipped)
– Ignition switch
– Wiring harness
The diagram typically shows an exploded view of these components, with individual part numbers assigned to each piece. This allows for easy identification of specific parts when ordering replacements or performing maintenance.
The layout of the diagram generally follows the physical structure of the snowblower, with subsections for each major assembly to help users locate specific parts within the machine’s overall design.
John Deere 826 Snowblower Parts Manual PDF
The John Deere 826 snowblower parts manual PDF typically contains the following key sections and information:
Table of Contents: Lists all major sections of the manual for easy navigation.
Introduction: Provides general information about the snowblower model and how to use the manual.
Safety Information: Outlines important safety precautions and warnings for operating and maintaining the snowblower.
Specifications: Details the technical specifications of the 826 model, including dimensions, engine type, capacities, etc.
Component Identification: Diagrams and descriptions of major snowblower components and controls.
Operating Instructions: Step-by-step guidance on how to properly use the snowblower.
Maintenance Schedule: Recommended routine maintenance tasks and their frequency.
Service Procedures: Detailed instructions for common maintenance and repair procedures.
Troubleshooting: Guide for diagnosing and resolving common issues.
Parts Diagrams: Exploded view diagrams of snowblower assemblies and subassemblies.
Parts List: Comprehensive list of all parts with their corresponding part numbers.
Wiring Diagram: Electrical system schematic.
Hydraulic Diagram: Schematic of the hydraulic system (if applicable).
Lubrication Points: Diagram showing all lubrication points on the machine.
Torque Specifications: Proper torque values for various fasteners and components.
Index: Alphabetical listing of topics for quick reference.
The manual serves as a comprehensive resource for owners and technicians to properly maintain, repair, and operate the John Deere 826 snowblower.
John Deere 826 Snowblower Price,
The price of the John Deere 826 snowblower can vary significantly based on its condition and whether it is new or used.
New Pricing:
– New models of the John Deere 826 are generally not available as they are an older model, but similar new snowblowers from John Deere typically range from $1,500 to $3,000 depending on features and specifications.
Used Pricing:
– Used John Deere 826 snowblowers can be found in a range from approximately $300 to $800. The price often depends on factors such as the machine’s age, condition, maintenance history, and any included accessories or modifications.
Overall, potential buyers should consider inspecting the machine and checking for common wear items to assess value accurately.
John Deere 826 Snowblower Where to Buy
The John Deere 826 snowblower can be purchased from various sources in the USA, including:
1. Local Dealerships: Authorized John Deere dealers often have new or refurbished models available, along with parts and service.
2. Online Retailers: Websites like GreenPartStore and other specialized equipment retailers offer parts and sometimes used models for sale.
3. Classified Ads and Marketplaces: Platforms like Craigslist, Facebook Marketplace, and eBay frequently list used John Deere 826 snowblowers from private sellers.
4. Farm Equipment Auctions: Local auctions or estate sales may feature used snowblowers, including the John Deere 826.
5. Tractor Forums and Community Boards: Online forums dedicated to tractors and outdoor equipment often have sections for buying and selling equipment among enthusiasts.
These options provide a range of purchasing avenues for both new and used models, catering to different budgets and preferences.
John Deere 826 Snowblower Service Manual PDF
The John Deere 826 Snowblower Service Manual PDF contains detailed information to help operate, maintain, troubleshoot, and repair the snow blower. It includes high-quality images and diagrams to assist users in understanding the machine’s components and functions.
The manual covers various aspects of the snowblower, including:
1. Operating instructions
2. Maintenance procedures
3. Troubleshooting guides
4. Repair techniques
This document is essential for owners and operators of the John Deere 826 Snowblower, as it provides comprehensive guidance on proper usage and care of the equipment. The manual helps users maximize the performance and longevity of their snow blower.
While official copies of the manual are available for purchase from various sources, some users seek free or lower-cost alternatives. However, it’s important to note that obtaining an authentic manual ensures access to accurate and up-to-date information specific to the John Deere 826 model.
The manual typically includes sections on:
– Safety precautions
– Controls and features
– Pre-operation checks
– Operating techniques
– Routine maintenance tasks
– Winterization and storage procedures
– Troubleshooting common issues
By following the instructions and guidelines provided in the service manual, owners can ensure their John Deere 826 Snowblower operates efficiently and safely throughout the winter season.
John Deere 826 Snowblower Carburetor
The John Deere 826 Snowblower carburetor is an essential component for the proper functioning of the machine. It mixes air and fuel in the correct ratio to power the engine. The carburetor for this model is compatible with several other John Deere snowblower models, including the 526, 726, 732, and 1032 series.
Replacement carburetors for the John Deere 826 Snowblower are available from various sources, including online marketplaces and specialty parts retailers. These aftermarket carburetors are designed to fit the specifications of the original equipment manufacturer (OEM) part.
The carburetor for the John Deere 826 Snowblower typically replaces the OEM part number AM108405. It is important to ensure compatibility when purchasing a replacement carburetor, as it needs to fit properly and function correctly with the specific snowblower model.
Prices for replacement carburetors can vary, ranging from around $17 to $40, depending on the supplier and quality of the part. Some carburetors may come with additional components or gaskets for installation.
Proper carburetor adjustment is crucial for optimal performance of the John Deere 826 Snowblower. This includes setting the correct idle speed and mixture for efficient operation in various snow conditions. Regular maintenance and occasional adjustments may be necessary to keep the snowblower running smoothly.
For those comfortable with DIY repairs, installing a new carburetor or making adjustments can be a manageable task. However, if unsure, it’s advisable to consult the snowblower’s service manual or seek assistance from a qualified technician to ensure proper installation and adjustment of the carburetor.
Common Issues with an 826 Carburetor
The John Deere 826 Snowblower carburetor can experience several common issues:
1. Clogging: Over time, the carburetor may become clogged with old fuel residue or debris, leading to poor performance or difficulty starting.
2. Flooding: If the carburetor floods, it can cause the engine to start and then die, or prevent starting altogether. This is often due to a stuck float or faulty needle valve.
3. Improper fuel mixture: An incorrect air-fuel mixture can result in the engine running too lean or too rich, causing performance issues or overheating.
4. Leaking: Fuel leaks around the carburetor can occur due to worn gaskets or loose connections.
5. Sticking choke: A stuck choke can cause starting problems or make the engine run poorly.
6. Idle speed issues: Incorrect idle speed adjustment can lead to stalling or rough running at low speeds.
7. Wear and tear: Over time, components like the float, needle valve, and jets can wear out, affecting carburetor performance.
8. Ethanol damage: Modern fuels containing ethanol can cause corrosion and degradation of carburetor parts if left in the machine for extended periods.
To address these issues, regular maintenance is crucial. This includes cleaning the carburetor, replacing worn parts, and using fresh fuel with a stabilizer.
For persistent problems, replacing the carburetor with a compatible aftermarket model is often a cost-effective solution, with prices ranging from about $17 to $40 depending on the supplier and quality.
John Deere 826 Snowblower Problems
John Deere 826 snowblowers can experience several common issues:
Drive problems: The snowblower may move slowly or stop when encountering resistance like snow. This is often due to a worn friction wheel, which can be replaced to restore proper drive functionality.
Engine power issues: Some users report the 8 hp engine seems underpowered for heavy snow, requiring use of the slowest forward speed to prevent the engine from bogging down.
Auger/impeller problems: Only one side of the auger may turn during operation, possibly due to a broken shear pin. Using the correct replacement shear pins is important for proper function.
Carburetor issues: After replacing the carburetor, the engine may surge – revving up and cutting off repeatedly. This often requires adjusting the carburetor settings.
General maintenance: For snowblowers that have been unused for long periods, it’s recommended to change the spark plug, oil, and fuel. Additionally, checking the auger gearbox oil level, friction disc wear, and lubricating moving parts can help restore proper operation.
No spark: If the engine won’t start and there’s no spark, the ignition coil may need replacement.
Transmission problems: Some users report transmission issues that may require repair or rebuilding.
Starting and stalling: The snowblower may start and run fine initially, but then stall when blowing snow. This is often related to carburetor problems caused by ethanol in modern gasoline.
Addressing these issues through proper maintenance, part replacement, and occasional repairs can help keep a John Deere 826 snowblower running effectively.
John Deere 826 Snowblower Reviews
Reviews of the John Deere 826 Snowblower highlight a mix of performance, durability, and maintenance experiences among users:
1. Power and Performance: Many users find the 8 HP engine underpowered for heavy snow conditions. Some report needing to operate at the slowest speed to prevent the engine from bogging down, especially in deeper or denser snow. Others have noted that while it works well in light, fluffy snow, it struggles with heavier accumulations.
2. Durability: The John Deere 826 is often praised for its build quality and longevity. Users who have owned their machines for decades report that, despite some wear and tear, the snowblower continues to perform effectively. Parts are still available, although they can be expensive.
3. Maintenance Issues: Common maintenance challenges include carburetor problems, such as flooding or difficulty starting without choke assistance. Users frequently mention the importance of regular upkeep to keep the machine running smoothly.
4. User Modifications: Some users have experimented with modifications like adding paddle extensions to improve snow clearing efficiency. Feedback on these modifications is mixed; while some believe they help, others feel that they may not significantly enhance performance.
5. Comparison with Other Models: Some reviews compare the 826 unfavorably with newer models or different brands, citing lighter construction and less robust features in certain versions like the 826D. Users with experience across various brands often prefer machines that feel more solid and capable.
6. Overall Sentiment: Overall, the John Deere 826 is seen as a reliable machine for those familiar with its quirks and maintenance needs. Enthusiasts appreciate its vintage charm and solid engineering but acknowledge that it may not meet the demands of every user, particularly in challenging winter conditions.
John Deere 826 Snowblower Belt Size
The John Deere 826 snowblower uses specific belt sizes for its operation. The primary belts required for this model are:
1. Auger Drive Belt: Size is 1/2 inch by 36 inches (M82612).
2. Traction Drive Belt: Also identified as M45613.
These belts can be sourced from various retailers, with prices varying based on the supplier. Replacement of these belts typically involves removing the snowblower cover and carefully detaching the old belts before installing the new ones.
John Deere 826 Snowblower Scraper Blade
The scraper blade for the John Deere 826 snowblower is designed to efficiently clear snow and ice from surfaces. It is typically made from durable materials to withstand harsh winter conditions.
Key features include:
– Width: The scraper blade is usually around 26 inches wide, allowing for effective snow removal.
– Material: It is commonly constructed from high-strength steel or a similar material that resists wear and tear.
– Installation: The blade can be replaced easily with basic tools, ensuring minimal downtime during snow removal tasks.
Regular maintenance and timely replacement of the scraper blade can enhance the snowblower’s performance and extend its lifespan.
John Deere 826 Snowblower Auger Belt
The John Deere 826 snowblower uses an auger belt with the following specifications:
– Part number: M82612
– Size: 1/2 inch width by 36 inches outside circumference
– Material: Aramid cord construction
– Type: 4LK/AK belt
This belt drives the auger mechanism that moves snow through the snowblower. It has an effective length of 36.22 inches when under tension. The belt is designed to be durable and resist wear from repeated use in cold, wet conditions.
To replace the auger belt:
1. Remove the chute rotator and belt cover
2. Separate the snowblower housing by removing two bolts
3. Release the spring tension on the old belt
4. Remove the old belt from the pulleys
5. Install the new belt, ensuring proper routing around pulleys
6. Reassemble the snowblower housing and covers
Regular inspection and timely replacement of worn belts helps maintain optimal performance of the John Deere 826 snowblower. The same belt is often used for both the auger drive and traction drive on this model.
John Deere 826 Snowblower Electric Starter
The John Deere 826 snowblower is equipped with an electric starter system. This feature allows for easier starting of the machine, especially in cold weather conditions. However, some users have reported issues with the electric starter not engaging properly.
The electric starter on the John Deere 826 is designed to work with Tecumseh engines, specifically the HM80 8 horsepower model. When functioning correctly, the electric starter should turn over the engine to initiate the starting process.
Common problems with the electric starter include:
1. Spinning and buzzing without engaging
2. Failure to turn over the engine
If experiencing issues, it’s important to note that different Tecumseh engines may use different starters. Identifying the specific engine model can help in troubleshooting or finding replacement parts if necessary.
For those facing starter problems, replacement parts are available from various sources. These parts are often compatible with multiple John Deere snowblower models, including the 726, 826, 826D, 828D, and others.
When the electric starter is not functioning, the John Deere 826 can still be started manually. Users have reported success with the following method:
1. Prime the engine (typically 3 pushes)
2. Set the choke to fully on
3. Pull the starter cord
4. Once running, turn the choke off and adjust the throttle
This manual starting method has been effective for some users, even when the electric starter is not working properly.
John Deere 826 Snowblower Wiring Diagram
The John Deere 826 Snowblower wiring diagram is a useful resource for troubleshooting electrical issues with the machine. It illustrates the connections between various electrical components, including the starter motor, ignition system, and any electric start features.
The diagram typically shows color-coded wires, such as the yellow wire mentioned in one user’s query about a splice that had become disconnected. This helps owners and technicians identify specific circuits and trace potential problems.
For those seeking the wiring diagram, it can often be found in the snowblower’s service manual or parts catalog. Some online resources and forums dedicated to John Deere equipment may also provide access to these diagrams.
The wiring system for the John Deere 826 Snowblower includes components like the electric coil and other parts related to the electric start feature, which are crucial for the proper functioning of the machine in cold weather conditions.
It’s important to note that the exact wiring configuration may vary slightly depending on the specific model year of the 826 Snowblower, as John Deere may have made modifications over time. When working on the electrical system, it’s advisable to consult the correct diagram for your particular model to ensure accurate repairs and connections.
Where to Find
To find a detailed wiring diagram for the John Deere 826 snowblower, you have a few potential options:
1. Check the snowblower’s service manual or parts catalog. These documents often contain wiring diagrams and are the most reliable sources for model-specific information.
2. Contact a John Deere dealer or authorized service center. They may have access to official documentation and wiring diagrams for your specific model.
3. Look for online resources dedicated to John Deere equipment. Some forums and websites specializing in tractor and snowblower repairs might have user-shared diagrams or information.
4. Consider purchasing a digital or print copy of the technical manual for your snowblower model, which should include detailed wiring diagrams.
5. Explore John Deere’s official website or customer support channels. They may provide access to technical documents or be able to direct you to the appropriate resources.
If you’re unable to find an official diagram, you might need to trace the wiring yourself or consult with a small engine repair specialist who has experience with John Deere snowblowers. Remember that wiring configurations can vary slightly between production years, so it’s important to use a diagram that matches your specific model and year when possible.
John Deere 826 Snowblower Oil Capacity and Oil Change
The John Deere 826 snowblower requires oil for both its engine and auger gearcase. For the engine, it’s recommended to use 5W-30 or 10W-30 motor oil with a service rating of SD, SE, SF, or higher (such as SG or SH). This oil should be used for regular oil changes to maintain the engine’s performance.
For the auger gearcase, there seems to be some conflicting information. Some sources suggest using GL5 gear oil, while others recommend 5W-20 engine oil. It’s best to consult the specific manual for your model to determine the correct oil type for the gearcase.
Regarding oil capacity, the exact amount isn’t specified in the provided search results. However, snowblowers of this size typically require between 20 to 40 ounces (0.6 to 1.2 liters) of oil for the engine. The gearcase oil capacity is likely to be much less, possibly around 4 to 8 ounces (120 to 240 ml).
To change the oil:
1. Run the engine for a few minutes to warm up the oil.
2. Stop the engine and locate the oil drain plug.
3. Place a container under the drain plug to catch the old oil.
4. Remove the drain plug and allow the oil to drain completely.
5. Replace the drain plug and refill with the appropriate amount of new oil.
6. Check the oil level using the dipstick, ensuring it’s at the correct level.
It’s recommended to change the oil at least once a year or every 50 hours of use, whichever comes first. Regular oil changes help maintain the snowblower’s performance and extend its lifespan.
